Who makes 17" wheels for the XP1000?? Any with bead locks? Testing 15’s now and may try some 17’s next. Thanks in advance

Check out Kawasaki Teryx & Polaris RZR Parts & Accessories | Polaris RZR 800, Polaris RZR 900 Parts, Kawasaki Teryx, Teryx 2 Parts | Aftermarket Parts For Sale for parts that protect and make your RZR look Good. Roof’s for 2 and 4 seat with sun visor, spoiler, and rain gutters that keep your shoulders dry. They come in many colors. 1/8” aluminum with a tough powder coat finish. Gasket is installed at Axiom side by side so all you have to do is set it on top and bolt it on. Also check out our Lower doors, A- Arm Guards, Trailing arm Guards and Skid Plates for full bottom protection. All parts easy to install with NO DRILLING! All Parts Made Here In The USA, Cincinnati, Ohio.

Check out Kawasaki Teryx & Polaris RZR Parts & Accessories | Polaris RZR 800, Polaris RZR 900 Parts, Kawasaki Teryx, Teryx 2 Parts | Aftermarket Parts For Sale for parts that protect and make your RZR look Good. Roof’s for 2 and 4 seat with sun visor, spoiler, and rain gutters that keep your shoulders dry. They come in many colors. 1/8” aluminum with a tough powder coat finish. Gasket is installed at Axiom side by side so all you have to do is set it on top and bolt it on. Also check out our Lower doors, A- Arm Guards, Trailing arm Guards and Skid Plates for full bottom protection. All parts easy to install with NO DRILLING! All Parts Made Here In The USA, Cincinnati, Ohio.

I have a 2014 RZR XP 1000 with stock wheels. I would like to put the high lifter A arms on the front, but they say I would have to upgrade my wheels, or add a 1 inch spacer on the front wheels to prevent rubbing. I’ve been wanting to upgrade to a wheel with beadlocks (and so that I’m running the same wheel/tire on all four corners…so I can mount a 5th as a spare). So, to get the 1" required to clear the high lifter A arms, I believe my options are to go with 5+2 or 4+3. I’m curious if anyone has a RZR XP 1000 and can tell me what the width is with a set of 5+2 or 4+3. I plan to buy the Method 401 14" Beadlock Wheels and Kanati Mongrel 30" tires (30x10x14), but I use an enclosed trailer, so I need to make sure with the new wheel and tire combination, that it will still fit in the trailer. Any experts out there?

Looking for info on this wheel combined with 30×10 or 950 x 15 tires. What is your overall width. Getting conflicting info. Have been told 65 to 66. No limit says offset is 3.5 and 3.5. With my msa m21’s which are 4and 3 I’m right at 70. Would like to narrow up just a little bit.

I know they are mostly for sound or seem to be but can I run just a slip on or do I need a tuner to run one?

Overnight the tail lights and under dash lights came on without key in my RZR and ran battery down…had to jump start it and periodically the same lights would not go off until I removed the relay in fuse box…does anyone know how to solve this??? I connect a Genius battery tender when stored but this happens when the tender is not being used. I guess I’ll have to install a battery switch under the seat right at the battery….ugh!!! I’ve already replaced and relocated my original voltage regulator six months ago cause of this. Any help would be greatly appreciated

Just got my results back from my second oil change.
Using Schaeffer 5w50 Supreme 9000 racing oil and a Wix 51356 filter.

Just thought I’d share.

I raced my buddy in his 900xp and my 1k and he completely blew me away both are stock. My 1k will hit about 30-35 and it feels like it hits a dead spot that I never noticed before(I never use high range) could that possibly be the belt?

broke the tie rod on my 15′ 1k. A friend has a 14 tie rod that is still good I can use. is it the same rod? will the 14′ rod thread into the 15′ end? thx