My fan has been being erratic lately. Sometimes it works perfectly fine, other times it kicks on late and will shut off before it reaches a cooler temp. 1. My fan has a different sound now like a bad bearing or mud lodged in it but does work. 2. Has coolant, not sure about an air pocket but I never messed with the system to make one. 3. Unplugged temp sensor next to thermostat and fan did not come on.
Any help is appreciated and like I said sometimes it works sometimes it doesnt
My fan has been being erratic lately. Sometimes it works perfectly fine, other times it kicks on late and will shut off before it reaches a cooler temp. 1. My fan has a different sound now like a bad bearing or mud lodged in it but does work. 2. Has coolant, not sure about an air pocket but I never messed with the system to make one. 3. Unplugged temp sensor next to thermostat and fan did not come on.
Any help is appreciated and like I said sometimes it works sometimes it doesnt
with 31 under it. long story short , I bought this 16 900s eps, about a month ago around 50 miles this code started to come up, at 1st I thought I may of accidently put it in safe mode, this only happens at slow speed when you want to start to get on it their will be "nothing" at the pedal, it will just slow down and shut itself off, then restarts and works fine. the dealer looked at it and said it was fine disconnected the battery and I was on my way. I road it about 150 miles since and it just happened again, anyone have this problem?
what would cause a pushrod to keep popping out of the rocker arm? its on the intake valve on the front cylinder. I have changed out the lifters and did a top end job. cranked the bike after the work and it ran fine for several temperature cycles. next day went to crank it and I hear the pushrod get thrown out from under the rocker arm and hit the valve cover. there is no apparent damage to any of the pushrods or rocker arms. all the valves look good changed the valve seals when it was tore down as well. could the cam be bad? or some how jumped time????
what would cause a pushrod to keep popping out of the rocker arm? its on the intake valve on the front cylinder. I have changed out the lifters and did a top end job. cranked the bike after the work and it ran fine for several temperature cycles. next day went to crank it and I hear the pushrod get thrown out from under the rocker arm and hit the valve cover. there is no apparent damage to any of the pushrods or rocker arms. all the valves look good changed the valve seals when it was tore down as well. could the cam be bad? or some how jumped time????
I’ve only found one company that makes a custom cage for the RZR 800 S and really don’t like the looks. Anyone know of others who are doing them or have pictures of them?
is anyone selling a front diff for for a 2013 800s ?? blew up my caseing and bought one off of ebay that i was assured would fit and didnt .. so now im looking for a diff or case .. anyone ??
On a recent dune trip I broke the rear sway bar on my wife’s RZR S 800. It snapped off right in the bushing the sway bar rides in. Anyone have one for sale? Shoot me a PM. Thanks.
I’m looking to put itp, or some type of aftermarket wheel on my 800s. Does anyone know if they have the same offset as factory wheels. I want my wheels to stick out just a little more without the use of spacers.
