Category Archives: RZR-S Specific Discussion

Vent line spew need help

Iv got a 2013 rzr 800s with a tuner 30in tires and a snorkel kit it has 280 hrs and 2000 miles we were driving 14-16 miles up a mountain and on top in high range and my ole lady said she heard a noise about 2 miles till we stoped and the vent line spewed oil out quite a bit it runs down to the trans i think i can see it when looking from the rear end behind a electrical plug and when i checked the fluid it was probably 3/4 in below the fill line what is wrong ?????????

Vent line spew need help

Iv got a 2013 rzr 800s with a tuner 30in tires and a snorkel kit it has 280 hrs and 2000 miles we were driving 14-16 miles up a mountain and on top in high range and my ole lady said she heard a noise about 2 miles till we stoped and the vent line spewed oil out quite a bit it runs down to the trans i think i can see it when looking from the rear end behind a electrical plug and when i checked the fluid it was probably 3/4 in below the fill line what is wrong ?????????

09 RzR s tie rods

Just installed a superatv tire rod kit. Steering
Wheel is centered and tire rods are adjusted
Equally. Steering is fine to the right. But it
Is 1/2 a turn short to the left. Kind of like the
Inner tire rod end is to big to fit in the steering
Rack. I took the boot off and sure enough it won’t
Fit. Anyone else have this problem?

removing the clutch

Hi Guys, trying to remove the clutch from my 2014 polaris 800s. I have one of Todd’s primary clutch puller but this clutch will not budge. I am going out of my mind. I have watched every video and have spoken to Todd alot. Any suggestions on how I can get it off. My wife has the straight jacket ready for me. Any help is greatly appreciated. John

removing the clutch

Hi Guys, trying to remove the clutch from my 2014 polaris 800s. I have one of Todd’s primary clutch puller but this clutch will not budge. I am going out of my mind. I have watched every video and have spoken to Todd alot. Any suggestions on how I can get it off. My wife has the straight jacket ready for me. Any help is greatly appreciated. John

Universal Foam prefilter

Ok so I have a quick question. I am tired of changing air filter on my RZR S so often and being so paranoid about dust and snow in the winter. I do a lot of riding on the machine and was thinking about getting some universal foam filter and making a little plastic piece to hold the foam and slide it in the intake between the seats. This would cut down on the dust into the clutch as well and help cut down the dust and snow in the winter that gets into the airbox. My thought is kind of like how the newer machines with the intakes on the side fenders have the prefilter foam in the intakes. My question is what type of foam should I use? If you have a link that would be awesome. I know my uncle has a 15 ace 570 and his is a coarse foam stuff in the intake. I just feel it would be worth spending $20 to help keep less crap out of the air box and clutch and would probably save me more than that when I got an extended engine life and extended air filter life. I already have an outerwares prefilter on my air filter but I figure the best filtration on a budget is what I am looking for. I can’t afford a whole air box with the spin style filters.