Looking at a 1000s at the dealer. Black pearl As of right now there is no rebates for the 2016 yet. Anyone know if there will be any for January? Also what are you paying out the door? I’ve got them down to about $15,700 for the 2016 plus tax title and fees so I’d be at $17,500 out the door. Does that seem like the going rate for them on the east side here.
Category Archives: RZR S 1000
Black1KS Cage build
I wasn’t sure if I should put this in the roll cage/ safety section or here, but here’s my Wife’s new ride.
We bought it about 6 weeks ago. I unloaded it off the trailer and ripped a few donuts in the shop. The next day my wife got it out to show off to the neighbor and laid it on it’s side within seconds! We knew we were going to do a roll cage but that pretty much set it in motion without hesitation. So here’s our 1000s that we started building on. I will continue adding pics as we finish it.
The rollover broke both fenders on the passenger side. So I took those off and tore it down to get to the cage.
Picked up these cage bungs from Branik Motorsports in Ft. Wayne, IN. These are also on Wide Open Designs webpage.
Cut some clean notches with the Versanotcher from RogueFab.com
We still have to work on bumpers. Then I will have to make some brackets for the factory door mount and harnesses. I will post pics of updates as we go but this is where we are as of Christmas evening.
We bought it about 6 weeks ago. I unloaded it off the trailer and ripped a few donuts in the shop. The next day my wife got it out to show off to the neighbor and laid it on it’s side within seconds! We knew we were going to do a roll cage but that pretty much set it in motion without hesitation. So here’s our 1000s that we started building on. I will continue adding pics as we finish it.
The rollover broke both fenders on the passenger side. So I took those off and tore it down to get to the cage.
Picked up these cage bungs from Branik Motorsports in Ft. Wayne, IN. These are also on Wide Open Designs webpage.
Cut some clean notches with the Versanotcher from RogueFab.com
We still have to work on bumpers. Then I will have to make some brackets for the factory door mount and harnesses. I will post pics of updates as we go but this is where we are as of Christmas evening.
Snow Plow Options 2016 RZR S 1000
I have been using a SnowSport 180 gravity plow on my Ram and other vehicles over the years. I’d like to be able to use this same plow on an RZR S 1000. This is basically to appease my wife, so that she will not hold the UT purchase over my head 🙂
The system I have now, uses a 2" receiver to accept the gravity frame. The plow slides on the frame. It has no up or down force. It just pushes.
Any ideas regarding a replacement system, or better yet, a front receiver (2") for the new RZR S 1000?
Help! Need Correct Winch Mount!
I bought a Terra 45 winch, but bought the wrong winch mount. What is the proper winch mount? Thanks!
Clutch kit for RZR 1000s?
Hi, I’m looking for a kit for running 30" tires. Not a mudder kit but sport / utility or 85 % trail and 15% technical muddy trails.
I can’t find any kits. Are they the same as
If someone could point me in the direction that would be great!!!!🍻
Thanks for the help
Clutch kit for RZR 1000s?
Hi, I’m looking for a kit for running 30" tires. Not a mudder kit but sport / utility or 85 % trail and 15% technical muddy trails.
I can’t find any kits. Are they the same as
If someone could point me in the direction that would be great!!!!🍻
Thanks for the help
Stereo for 1ks
Just traded my 12 800 50" in for one. I have 12 miles on it so far and I’m missing my tunes. What’s everyone running besides Polaris stuff.
Sent from my XT1254 using Tapatalk
Lean angle on 1000S
I was showing a friend my new 1000S and he asked what the maximum safe angle that could be traversed on a hill?
Anybody have that answer?
Drive Belt?
Does the 2016 1000s use the same belt as the 2015 900s? I was told it did, and I have a new belt from my 900s, and didn’t want to buy another belt if I did’t need to>
Gates C12 belt part number for 2016 xp1000.
What is the part number for the C12 gates belt for a 2016 xp1000?
I think it’s 27C4159 but I’m not sure.