Anybody know where I can find a OEM Polaris wiper kit for an rzr? Polaris part number 2876854. It appears to be made of unobtainium. No one has one and popo no longer makes it. I should not have procrastinated on this one. I’ve pretty much tried everywhere ebay, amazon, all the major parts distributors, dealers from Michigan to California nobody has one.
Category Archives: RZR 800 Specific Discussion
800 skipping and check engine light HELP!
2011 800 50 inch and we just took the whole front end apart and took the whole belt system apart and put it all back together. Wellllll we get it all back together cranks and runs fine….so we think. Once you get up to 5 or 10 mph it starts skipping and cutting out and the check engine light comes on. Ive checked codes before but you cant check this one because the light will not stay on! I can play with it and get it to run about 20 before it starts skipping and i mean skipping pretty bad. I wouldnt think taking the front end or the belt system apart would do this but its just crazy it was running perfect then we take those apart put it back now it runs like crap. Any help will be appreciated.
Do wheel spacers make you rzr drive squirrely
I had spacers on my jeep and it was very squirrely felt like it was drifting or floating has anyone seen this on there RZR Im looking @ running about 1.5 spacer front and rear to clear my motor mount.
2012 Clutch Engagement RPM?
Just wondering at what RPM the clutch engages on a stock clutch? Mine is engaging at 2000.
2012 Clutch Engagement RPM?
Just wondering at what RPM the clutch engages on a stock clutch? Mine is engaging at 2000.
2012 Clutch Engagement RPM?
Just wondering at what RPM the clutch engages on a stock clutch? Mine is engaging at 2000.
26x10s on Factory Crushers..NEW TIRES!
Got my 26x10x12 Mud Lite xl’s mounted today. I was worried about needing spacers in back, came close but no spacers needed! Need to buy a valve stem for one of the front tires tomorrow. I’ll post a couple more pictures once I’m done.
Clearance with rear end jacked up. MIGHT be 1/8" clearance.
This little tire changer I picked up from harbor freight for $40 made the job pretty easy, had all four done in a little over an hour.
26x10s on Factory Crushers..NEW TIRES!
Got my 26x10x12 Mud Lite xl’s mounted today. I was worried about needing spacers in back, came close but no spacers needed! Need to buy a valve stem for one of the front tires tomorrow. I’ll post a couple more pictures once I’m done.
Clearance with rear end jacked up. MIGHT be 1/8" clearance.
This little tire changer I picked up from harbor freight for $40 made the job pretty easy, had all four done in a little over an hour.
help me decide on tires
Hi, I am putting 26x9x12 tires on my 50" rzr 800. I can’t decide between these two tires. Either bighorn 2.0 or mud light XTR. I ride on your normal trail conditions, not a true mud pit guy. But, I do want a tire that if I come upon a mud hole, I would like to be able to do some light playing. What tire do you recommend and why. Thanks , Chad
help me decide on tires
Hi, I am putting 26x9x12 tires on my 50" rzr 800. I can’t decide between these two tires. Either bighorn 2.0 or mud light XTR. I ride on your normal trail conditions, not a true mud pit guy. But, I do want a tire that if I come upon a mud hole, I would like to be able to do some light playing. What tire do you recommend and why. Thanks , Chad