I’m in need of 2 12×8 factory Polaris wheels, pm me please. Pic is to show attention and a description

Attached Thumbnails

 

Hello guys:

I started to here a clanking noise at the motor area, not clear where it came from , it looks maybe from the upper part of the motor but sometimes I feel it came from lower. Not sure. I do notice that it goes out when I rev up the motor. It accelerate good, makes idle at about 900 to 1080 rpms. I runs good.

This link is a video that the sound can be heard.

I was driving along in the sand dunes and got stuck on a hill in some trees. Had to lift the front end around to point down cause of the trails limited space. Left it running the whole time as I had just gotten it out for the first time in quite awhile. Drove for maybe another 10 minutes and noticed a burnt oil smell. Stopped and had some smoking from around the engine. Looked it over and didn’t see anything specific so took it easy back to camp maybe couple hundred yards. Pulled up and it died . Hasn’t started sense. Pulled air box cover off and had maybe half a quart of oil in there and a pretty nasty air filter. Talked to shop near buy and they said to change oil, spark plugs, and air filter and it should start. Well that didn’t work and now I’m home got it apart and still can’t find anything outwardly wrong with it. Need help and hate over priced shops with no diagnostic ability. Money pits here in Eureka , CA.

Well looks like I get to try my new snow plow out today, 2" to 4" here in Kalispell, Mt today. That’s a YAHOO folks.

I’m about to buy a 2010 Walker Evans edition 800 with very low hours. the area I ride is very rocky and I’m compiling a list of guards and things that will need to be ordered. Is there anything I should know about this model when ordering things like guards or lifts?

1. A-Arm guards
2. full under belly skid plate
3. 2" lift (min neccessary for the rocky terrain)
4. 1-2" wheel spacers
5. winch

Anything else I’m forgetting?

I’m about to buy a 2010 Walker Evans edition 800 with very low hours. the area I ride is very rocky and I’m compiling a list of guards and things that will need to be ordered. Is there anything I should know about this model when ordering things like guards or lifts?

1. A-Arm guards
2. full under belly skid plate
3. 2" lift (min neccessary for the rocky terrain)
4. 1-2" wheel spacers
5. winch

Anything else I’m forgetting?

Hey guys. I just got back from checking out a 09 rzr 800. When i first started driving i caught a quick smell of gas. I checked everything and there were no leaks good oil, i checked the belt and the starter, no problems with any of them. I’m wondering if any of y’all would be able to pinpoint this and if its something to worry about. It was maybe for 5 seconds of smelling it.

thanks

Hey there I’m new to the rzr family so I was out the other day and only noticed it on video but there’s this whining noise while it’s running. No performance issues just wondering if this is normal? Here is the vid I have it on Dropbox https://www.dropbox.com/s/emw2uny2nj…A0009.mp4?dl=0

took me a couple days but really happy with how it turned out..wanted to strengthen up the bumpers as they are weak as they come …should make the bike a little stiffer as well to save on the frame wear.i bought some tubing from the local metal yard and Polaris style connectors from SATV……someday I will have everything powedercoated but 4 coats of rattle can will have to do for now…what do yall think?