I have an 03 foreman es. it wont let me shift below 2nd. I can shift up and down above 2nd, and it is making a noise when I try to shift down below 2. manual shift wont do it either.
I have an 03 foreman es. it wont let me shift below 2nd. I can shift up and down above 2nd, and it is making a noise when I try to shift down below 2. manual shift wont do it either.
I have a 1998 Foreman 4×4 TRX450S that I don’t use very often. I haven’t changed the oil in probably 3 or 4 years and decided to do so yesterday. Everything went well except that I now have a leak coming out of the bottom of the oil filter cover plate. It only drips when the motor is running. All 3 bolts are tight and the large rubber o-ring on the inside of the plate seemed to be in decent shape.
I have a 93 Honda 300ex. When it shifts it feels stiff. When I shift down it stays down when I shift up it stays in the up position as well. It also won’t go any higher than 2nd gear. But goes into 1st 2nd and neutral no problem. Help would be greatly appreciated!!:icon_gd:
Hello the other day my dog and I were riding around on atc every thing norm as usual when I pulled back to barn with it still running I climbed off and it studded a couple of times like turning the on and off switch would do and about 30 sec goes by it did it but died . So I check the obvious getting gas getting spark .. well to make a long story short the Damm thing only runs when spark plug boot is pulled away from plug moment I put it back on it dies has the best spark than I have ever seen replaced boot coil wire spark plug.. im stumped dogs bummed
Any ideas be greatly appreciated…
Ricko
Hey guys…Just thought I’d share a lesson learned NEVER EVER USE ANYTHING OTHER THAN OEM OR DID CAM CHAINS!!!!!!!
Back when I Rebuilt the "Rhino" I purchased a DID chain to install…..At that time I also purchased an El cheapo ebay cam chain…It was to be an emergency chain…In the coarse of the rebuild I accidentally used the ebay chain!
Just today realized my mistake…..Chain is stretched WAY beyond spec…It also jumped a tooth! So I’m rippin it back apart to make sure everything is OK.
Hey guys…Just thought I’d share a lesson learned NEVER EVER USE ANYTHING OTHER THAN OEM OR DID CAM CHAINS!!!!!!!
Back when I Rebuilt the "Rhino" I purchased a DID chain to install…..At that time I also purchased an El cheapo ebay cam chain…It was to be an emergency chain…In the coarse of the rebuild I accidentally used the ebay chain!
Just today realized my mistake…..Chain is stretched WAY beyond spec…It also jumped a tooth! So I’m rippin it back apart to make sure everything is OK.