I see the two lights under the front rack are on a relay next to the eps relay do I run a single wire to power that relay when on high beam or jump wires at the switch to have all 3 on by keeping that relay on? not sure if older sportsmans had a relay or not for the 2 fixed lamps.

Right now I’m running 26" bighorns and my powers weak. which I knew they were a heavy tire but didn’t think they were that bad. I was gonna put a clutch kit in it in case I ever wanted to up size a bit more, however my mechanic said that I should only put a secondary clutch spring in it. I’ve got over 3500 miles on the tires and the rear is almost wore out from spinning so much. I plan on buying 28" mega mayhems. I’ve heard EPI’s PDS-6 purple would be my best choice. Opinions?

Attached Thumbnails

 

Right now I’m running 26" bighorns and my powers weak. which I knew they were a heavy tire but didn’t think they were that bad. I was gonna put a clutch kit in it in case I ever wanted to up size a bit more, however my mechanic said that I should only put a secondary clutch spring in it. I’ve got over 3500 miles on the tires and the rear is almost wore out from spinning so much. I plan on buying 28" mega mayhems. I’ve heard EPI’s PDS-6 purple would be my best choice. Opinions?

Attached Thumbnails

 

Brand new owner of a brand new 2015 570SP Hunter edition, (Because I would have painted it camo anyway).. I figured there were a ton of aftermarket options to add a rear seat for momma, and maybe some pegs to set her feet on.. Dealer made it sound like there was NO WAY to add a seat, unless I bought the 850-touring model… Ideas for making this a 2-seater, with the option of some what quick removal when I want to put other stuff on the back rack ?

Brand new owner of a brand new 2015 570SP Hunter edition, (Because I would have painted it camo anyway).. I figured there were a ton of aftermarket options to add a rear seat for momma, and maybe some pegs to set her feet on.. Dealer made it sound like there was NO WAY to add a seat, unless I bought the 850-touring model… Ideas for making this a 2-seater, with the option of some what quick removal when I want to put other stuff on the back rack ?

2014 570.when I ride in water about 1 1/2 foot going slow my 570 starts to run bad no water in air box, no water in clutch and no water at the spark plug if I let off the throttle when im on dry land it will die. it will start right back up no problem. I worried if I ride in a long water hole I wont make it . seem to lose power, no skipping or anything like that just loses power. I thought it was because I was in high so I tried in low and same thing. anyone else have this happen?

Ok, my sportsman 600 is getting to the point that I may roll it into a creek and forget about it. I am looking at new machines and I have been leaning towards a 570. How would it compare to the 600? Is it a good machine? it seems way under priced compared to some other machines. I have started looking at Kawasaki’s and Suzuki’s. What is everyone’s input??

Replacing cable with Amsteel rope, Does line go over top or the bottom of winch, I thought I saw some where the bottom but thought I better check, Thanks

Looking to purchase 28" zillas and wondering what clutch kit I should go with without breaking the bank. Or just change out a spring if needed. I know I can go without but like to get something just to be safe

Any help is greatly appreciated

I got to looking at the seat trying to figure out why it has the gap when I am riding it. I took both side panels off and noticed on both sides that the seat doesn’t even touch the frame. The only part touching anything is the front on the two tabs where they stick out from the tank and the rear of the seat where it sits down. The center of the seat has no support. I believe what is happening is when we sit on the seat it pushes the center down and bows the top edge back making the hole at the front of the seat at the fuel tank. I am going to go to the hardware store and see if I can find something to attach to the frame where the seat tabs are suppose to touch the frame and I believe this will support the seat much better. I believe I can find some type of rubber tab with the sticky back to attach to the frame.

Ronnie