Does anyone have actual pictures of the wiring diagram and how everything gets hooked up. I have the diagram that just shows me the colors of the wires. I’m confused on how to hook up the battery cables to the starter relay and the starter and where to hook in the fuses.
Hey guys, any1 install the tusk extended axle onto their atv? I’m in the process & noticed the sprocket hub has play in it. It has a little play front to back & for left to right if the retainer clip wasn’t there the sprocket hub would slide right off. Is this normal? I know the stock 1 is pressed on & has no movement left, right, front, or back. Should I send back?
So I picked up cheap tired with rims that match the bolt pattern and switched them over. Only issue is I had to install the rear tires inside out on the rim because if the huge offset needed. The rotation of the tires is correct just the trim inside is on the out side lol. Attachment 25216
Hi everyone, so I got a 2006 TRX 450ER bought it from a family member. Anyhow I’m getting what seems to be infamous starter issue, it’s been to the Honda dealer twice for the issue but in any case I want to convert it to kickstart. Can anyone shoot me some info on subject? Any links or things to look out for? Thanks
I am looking to add horsepower to the quad but not go into the unstable big bore power world. I would like to keep it to bolt on power as I will be doing all the work in my garage.
I already have full Yoshimura exhaust and will be putting 450R carb on it when the work is done.
What combination do you recommend?
Piston Kit?
Cam Shaft?
Valves?
Am I missing anything?
I am looking to add horsepower to the quad but not go into the unstable big bore power world. I would like to keep it to bolt on power as I will be doing all the work in my garage.
I already have full Yoshimura exhaust and will be putting 450R carb on it when the work is done.
What combination do you recommend?
Piston Kit?
Cam Shaft?
Valves?
Am I missing anything?
Hi all,
I’m new here so if I’m using the wrong thread, please excuse. I have a 1984 trx200 and love it. Only problem is the plastics are falling apart. Any idea where I can find ones to fit it?
Anyone know where I can get an end cap to put back on this mega max pipe? Don’t have the funds to splurge on a completely new system at the moment. 2000 400ex. Attachment 25195
Thanks.
Hey guys, installing a LSR cast bearing carrier with tusk extended axle. The OEM carrier takes outer o-rings on the left & right side to seal out dirt. The LSR carrier comes with a groove, on just the brake side, which looks like its for a o-ring but not the sprocket side. It also did not come with any o-rings. Do I install it without the o-rings, install 1 on just the brake side with the groove, or add 1 to BOTH sides? Any help would be much appreciated, thank you.
I will be picking up a family members Recon to do a little troubleshooting tonight. They had some electrical problems with it last year: TRX 250 No Spark
All has been good since then till a couple weeks ago.
We had a big group riding @ Mines and Meadows in Beaver, PA. After an hour or so of riding, we took a water break. After the break, the recon rider went to start it up and there was NO power at all.
No headlights, no neutral light, nothing at all…anywhere.
The pull starter is broken so we weren’t able to try that.
My first inclination is to check to see a fuse is blown, then to see if the battery is charged. If those check out my next step is to check for power on the red wire going into the ignition switch and power on the blue wire coming out of the switch in the On position.
If anyone knows of a common failure that may have caused this, I’m all ears!