when was the last time anyone was able to get ahold of Adam, or if you live in his area ha even seen him. From what I read on facebook it seems the guy has fallen of the face of the earth.
Can anyone tell me how to tell if my clutch plates and drum is bad. Ive got some clutch slip going on. I was using regular oil. I realize now that was a mistake. I went and bought a couple oil filters and some Yamalube. Ive got it all apart and I was thinking that the plates look smoked.
I was washing my atv after a long 200 mile ride today and I noticed the front left axle had quite a bit of play, the end that goes into the differential, I assume this isnt normal?
Removed primary from sons 08 Grizz for re-grease & cleaning.
Found flat spot on most of the rollers.
Interesting question is how can you get a single flat spot on a roller, I mean should it not flat spot both sides.
Hi everyone, new to the site. Recently bought my first bike, a 2002 grizzly 660. Been fixing it up and learning a lot through this site, so recently decided to join. Any way, wondering if anyone can help me get to the bottom of this. My four wheel drive is not working, but I can hear the actuator when I click the button, so I assume it is trying to engage. I am new to these machines, but desperate to get this bike in top working order. Any advice on what the problem could be?
This is my first Grizzly. First thing is when I start it, it will start and then almost always die after a couple seconds. It’ll start right back up but just curious if that’s normal.
Second thing when I hit the throttle pretty hard from a stop it sounds likes its gonna die and bogs down for a second before accelerating. Any ideas?
This is my first Grizzly. First thing is when I start it, it will start and then almost always die after a couple seconds. It’ll start right back up but just curious if that’s normal.
Second thing when I hit the throttle pretty hard from a stop it sounds likes its gonna die and bogs down for a second before accelerating. Any ideas?
ok, so i ordered a new starter solenoid relay on eBay and although it said it was the right one it seems as though the connectors aren’t the same. i can post pics if needed!
I am wondering if i can just splice the wires together instead of modifying using the connectors? are there any issues with doing this?
I know i would have to tape them up well so that they don’t pull apart, but i know i can do this no problem.