hello everyone! im new here and this is my first post.
i have a 2011 700 grizzly with 26"itp bajacross and 14" wheels.
i have noticed it seemed kind of sluggish since i bought it. so i cleaned my clutches then greased weights/sliders and replaced the belt.
the valves where checked by the dealer last fall and i was told they where in spec.
new plug
new oil
i added a no-toil filter
after cleaning the clutches i had it up on the stand checking to make sure everything moved smoothly.
it seems to be fine if i roll onto the throttle but if i hammer it the engine seems like it misses or lags.
i don’t know if it is related but after the engine warms up i can hear a ticking that sounds like its coming from the left side. also when warm it tends to back fire after coasting and getting back on the throttle
hello everyone! im new here and this is my first post.
i have a 2011 700 grizzly with 26"itp bajacross and 14" wheels.
i have noticed it seemed kind of sluggish since i bought it. so i cleaned my clutches then greased weights/sliders and replaced the belt.
the valves where checked by the dealer last fall and i was told they where in spec.
new plug
new oil
i added a no-toil filter
after cleaning the clutches i had it up on the stand checking to make sure everything moved smoothly.
it seems to be fine if i roll onto the throttle but if i hammer it the engine seems like it misses or lags.
i don’t know if it is related but after the engine warms up i can hear a ticking that sounds like its coming from the left side. also when warm it tends to back fire after coasting and getting back on the throttle
Hey guys new guy here. Just got a 2014 grizzly 700 eps se. I put 27" swamp lites on it now I’m upgrading the clutch. I’ve done my research on what to do shims spring and was going to go with 8 660 weights. Just was curious if anyone has or knows if 550 weights will work. I believe they are 16g but I’ve tried searching Google to tell me if the parts are interchangable and cant find any info
Hey guys new guy here. Just got a 2014 grizzly 700 eps se. I put 27" swamp lites on it now I’m upgrading the clutch. I’ve done my research on what to do shims spring and was going to go with 8 660 weights. Just was curious if anyone has or knows if 550 weights will work. I believe they are 16g but I’ve tried searching Google to tell me if the parts are interchangable and cant find any info
Ok. There is a ton of stuff on here about shims, sheaves, weights and to much for me to comprehend it all. I have a stock 2003 660 grizzly with 26 inch vampires. All I wanna do is shim and secondary spring. Am I gonna notice this change? And which color in the rainbow spring should I get?
Ok. There is a ton of stuff on here about shims, sheaves, weights and to much for me to comprehend it all. I have a stock 2003 660 grizzly with 26 inch vampires. All I wanna do is shim and secondary spring. Am I gonna notice this change? And which color in the rainbow spring should I get?
Ok I’m tired of fooling witht this carb. no float adjustment has worked. so tomorrow I’m ordering a new one.I was wondering. is the new carburetor going to be ready for installation. I guess what I’m saying is will I need to make any adjustment other than maybe the idle speed?
Has anyone ever used "Lucas Engine Oil Stop Leaking"?
If so how much do you recommend being used in my 2013 Grizzly? I read a few forums that it worked great, but looking for a amount to use prior to doing so.
