Category Archives: Grizzly Accessories

Ehs products

Does anyone know the hp of a 14-15 grizzly? I haven’t installed my ehs fuel controller yet I’m buying the full air box first then install it all.They claim a 4 hp gain.ls the power very noticeable having ehs fuel controller air box and 2 r tip? Can you hear the air box sucking air?

Heated accessories

So I just installed my clamp on dual climate heat demons and now looking at a heated seat.l see Symtec sell a heated pad has anyone gone this route?l also see komplin sells a seat cover that plugs direct into your outlet but read on here that there is fitment issues and are bulky.Whats yalls input on heated seats.btw the grips and thumb work flawlessly.

OEM Plow Mount?? 2006 Grizzly 660 Outdoorsman Edition

I have an 2006 Grizz 660 Outdoorsman. I am trying to figure out what kind / manufacture the mount is on my machine. Its not a Cycle Country, because the spacing is way off (smaller span).

Was there a "OEM Mount" or something that Yamaha put on there stock? I ask because when I was looking up under there, it looks to be welded. Not some home weld job either. It looks factory.

I am trying to figure this out because it appear that if I was to buy another mount, the current one would be in the way.

Glide Plate Warranty??

Cleaned up the Griz a bit this week and noticed a few issues with my Glide Plate. I was going to just add some washers and fix it the best I could, then I started wondering if maybe Yamaha would step up and warranty the damages. I called my dealership and asked, they sent an email off to Yamaha, Yamaha emailed back asking for photos. So I took the photos below and sent them off. Now it’s a waiting game.

Newly installed, all fasteners torqued properly.

11 Months old, fasteners pulling through glide plate.

Forward mounting bolts still in perfect shape.

2016 Grizzly – Warn Provantage Plow Setup Installed

First off, thank you for all your information. The 2016 grizzly is brand new so my local dealer was waiting on the plow mount kit but they finally got it in the other day. I actually called warn and they gave me a part number (which was not listed on their site) but no one really had any information about it.

I went with all Yamaha/Warn parts since its made to work with one another. I think the only thing I could of done differently was saved a few bucks on the plow blade and push tube assembly. I found them on amazon for much less but dealer couldnt match it. They insisted to use their parts, and since they discounted the price I went with it for the sake of convenience and assurance it would work.

I got all the parts at local dealership, but found the cheapest pricing online and had them match it.

Here are the links to the Yamaha Accessory page of the products I used:

Winch Mount Kit: $114.99
https://www.shopyamaha.com/product/d…&dealernumber=

I had them price match to this link, $89.69.
https://www.yocracing.com/accessory_…searchexec.asp

ATV Plow Kit: (this includes the blade and push tube assembly)
Yamaha’s price is $476. I couldnt find it on the YOC site since they had separate part numbers.
https://www.shopyamaha.com/product/d…&dealernumber=

Amazon has the warn provantage 54" blade for $200 on the blade

$129 on the push tube.

The Yamaha Warn blade is yellow, while the standard one is black. I could not find any other difference. Someone please correct me if I am wrong. They charged me $288 on the blade and $188 on the push tube assembly.

Yamaha/Warn Provantage Winch 2500
Yamaha price is $359.99
https://www.shopyamaha.com/product/d…&dealernumber=

I had them price match to $287
https://www.yocracing.com/accessory_…product=612428

ATV Plow Mount Kit
Yamaha price is $235
https://www.shopyamaha.com/product/d…&dealernumber=

I had them price match to $188
https://www.yocracing.com/accessory_…product=811797

Installation:

This was my first ever installation on any ATV or any winch kit for that matter. I thought the instructions were decent but still read over and did a few double takes to figure things out. Overall it took me about 3-4 hours. if I was to to do again, easily could get it done in about 2.5 I would say.

The winch and winch mount bolt right up to the plow mount. I had to remove the front bumper/bar in order to have enough room to fit the whole unit, which wasnt listed in the instructions. but then again it appeared the instructions were made more for the previous model due to the photos they showed at the end, it didnt match up.

I routed the power cables to the winch on the left side of the machine as best I could, only downside is red cable visible. May put some loom on that.

I had some trouble with the battery terminals since the square nut at the bottom would fall down, so I fussed with that for a little until I figured out a method.

Wiring up the switch was a breeze. No cutting or splicing, the yamaha/warn kit was direct plug and play to the accessory wiring off the key switch. Really nice touch. Wires were the perfect length and overall I like the kit.

The plow mount is very stealth. You can barely tell its there. Since this is a front mount system you loose no ground clearance which is a huge plus. I hooked up the plow to test it and it did only take a matter of minutes. The system is well thought out. The plow blade just barely cleared the doors to the shed, so major score there! You can lift the blade nice and high, another huge plus.

Overall Im pleased with the kit and Im glad I got a chance to install it in 70 degree weather before winter comes next month.

Few questions for anyone reading that knows about the winch/plow:

Does anyone know anything about the warn slack control listed on the site. I guess it knows where to stop the line so you dont give too little or too much cable when operating the plow. Curious to know if that hooks up along side of the standard winch switch or it gets installed instead of it.

Regarding the fairlead, I noticed when I tighten the winch, there is a small amount of play and it sort of bends back. I have the bolts tightened well, I guess the winch is just that strong. Is this an issue?

Spring tension. I managed to set it to the stronger setting thinking it had to be that way. Is the stiffer or softer option better for this ATV?

Should I get the winch cover?

Blade angle? Set it to the standard one the instructions suggested.

Hope this post was helpful to anyone looking to add to the 2016 grizzly. Any questions let me know!

Rox Riser on 2016

Anybody tried a Rox Riser, (3R-B12POE) block offset riser on a 2016 Grizzly/Kodiak with the speedometer/instrument panel and the work light. Does it fit with the brakes, throttle, instrument panel etc. and how does it look?

Fire extinguisher and mount

Wanting to get a fire extinguisher to have with me out on the trail. What do y’all use? I want all metal, no plastic valve or spout on it and I would like to be able to mount it to the rack. Let’s see what y’all use!

Sent from my XT1080 using Tapatalk

Viper Elite snow kit

So i put this on my 2014 550 griz. The instructions sucked, but it was fairly easy to install. I had other electric cables from other winches that where much shorter and easier to use. I guess I’ll see how it works once the snow flies.