Category Archives: Forum Help, Questions and Info

New member – looking for rzr cab enclosure

Hello I am looking a full soft cab enclosure
For my 2012 800 LE, 2 seats, rzr. I do not have
doors currently so the pro armor is not
an option. I am looking for a full
Soft cab enclosure with hinged doors. Also
A good plastic windshield recommendation
will be appreciated.

The pure polaris looks great however
I can not find these?

Found a soft cab enclosure made by
Pro Rhino soft cab enclosure with hinged
Doors. This is sold by Side X Side for
$ 835. with windshield. Any reviews on this
This or other good fitting enclosures
W or W/O windshield will be greatly
Appreciated, thx, Jon
Be

New member – looking for rzr cab enclosure

Hello I am looking a full soft cab enclosure
For my 2012 800 LE, 2 seats, rzr. I do not have
doors currently so the pro armor is not
an option. I am looking for a full
Soft cab enclosure with hinged doors. Also
A good plastic windshield recommendation
will be appreciated.

The pure polaris looks great however
I can not find these?

Found a soft cab enclosure made by
Pro Rhino soft cab enclosure with hinged
Doors. This is sold by Side X Side for
$ 835. with windshield. Any reviews on this
This or other good fitting enclosures
W or W/O windshield will be greatly
Appreciated, thx, Jon
Be

12 800s Steering not EPS

Had something strange happen this weekend: 2012 800S w/1800 miles
Riding down the trail at about 30MPH, all is good. I thought I had missed my turn, so stopped, backed up, Ok I’m good.
Started out again, the frontend was all over the place, wondering from side to side, felt like the frontend was going to fall off!
I stopped and made sure everything was attached and tight, turned the wheels by hand side to side a couple time to see if anything looked wrong. All was good, stated off again, steering returned back to normal for the rest of the weekend. Anyone else experience this or know what the cause is?

Engine stalls

I was grading my drive for over 1/2 hour at very low speed when suddenly the engine began stalling at idle. It must be started in gear with one foot on the gas to get it to move. The manual suggests many different solutions – just wondering if anyone had experienced and solved this before I start going through all the steps. It was running smoothly with no problem, the fan was working when needed and plenty of gas.