I just purchased the new 4 seater turbo. I plan on running 32 in tires on the dirt. Is the clutch OK for this tire size or should I plan on changing it?

I have a 2010 Rzr4 800 with 30in mudzillas and do more trail riding then mud, I do some mud but not much. which would be the best clutch kit for me. Thanks in advance.

I’ve burnt my belt out on my 700 Grizz. Only done 1000 miles. I competed the Croatia Trophy last year. Which is a hard trail riding event. Since then I’ve done a lot of road miles. Last week I spent a week in Scotland riding some very technical trails with a lot of winching involved. Which I know is bad.
I have a set of 28" Kenda Bearclaws, which are actually 27" when measured. It’s snorkelled. A rad relocate kit. Apart from that it’s stock.
I was thinking about a basic EPI kit and severe use belt. Is the belt worth it? Or should I fit the clutch kit and a standard belt?

My riding is mainly fast trails with a bit of winching and a bit of mud.

What do you experts think and recommend?

I have an 09 rzr 800 that I am going to put an mcx 11lb turbo kit on. I have your sport utility higher elevation kit now. I have 26" tires. I ride mostly in the desert and dunes and sometimes trails. I usually ride between 3000-7000.’ Can you please let me know which kit I will need. Also can you be specific on the weights and springs that will work best for my setup. Thank you for your time.

I have an 09 rzr 800 that I am going to put an mcx 11lb turbo kit on. I have your sport utility higher elevation kit now. I have 26" tires. I ride mostly in the desert and dunes and sometimes trails. I usually ride between 3000-7000.’ Can you please let me know which kit I will need. Also can you be specific on the weights and springs that will work best for my setup. Thank you for your time.