I just changed the boot between the air filter and the carb. I noticed the hose that connects the air filter to the top of the manifold has a slit in it. It seems to be marked on the hose which makes me wonder if it is supposed to be there. Anybody know if it is?
Category Archives: Engine and Drivetrain
Wheel bearing
2015 rzr 1000
Wheel bearing
2015 rzr 1000
Well thought I just blew a belt but!!!!
Thought I blew a belt but when I took the clutch cover off I found this, anyone know what could cause this I am pretty sure this is why belt went, 2015 900 xc with 419 mlsAttachment 133071
2011 800s front end ticking
Seemed to have aquired a metal ticking noise in my front end. Thought it was my winch cable hook but no. Maybe front diff??
problems with ignition advance angles Help please
Hello
hello I have a 2010 rzr4 800 and I rebuilt the engine. I have problems with spark advance angles. Someone knows how to put on or about the advance leads. thanks
hello I have a 2010 rzr4 800 and I rebuilt the engine. I have problems with spark advance angles. Someone knows how to put on or about the advance leads. thanks
problems with ignition advance angles Help please
Hello
hello I have a 2010 rzr4 800 and I rebuilt the engine. I have problems with spark advance angles. Someone knows how to put on or about the advance leads. thanks
hello I have a 2010 rzr4 800 and I rebuilt the engine. I have problems with spark advance angles. Someone knows how to put on or about the advance leads. thanks
gibson exhaust
is anyone running the Gibson Exhaust. I am looking at adding that to the rzr since I am doing the top end.
RZR 1000 Clutch ?
Ok guys got a question. I recently installed a STM rage 3 primary only and #0 inch outback max tires. When I called STM I told him my setup and told him I was mainly mud and trail. Now with these mods my bike pulls hard till about 50 then it slowly climbs to between 60 and 65 and that’s it. Is this normal or do I have a problem? No belt slip or anything
Clutch Kit
Okay so after going to Oregon dunes I realize I need to reclutch me RZR. It’s a 2013 XP4 900 with stock motor running a 27" paddle tire. What do you guys recommend? How hard is it to install? How will it affect the RZR if I put the stock tires back on? Thanks