Hey guys I was just wondering if anyone knew how to take the speed limiter out of a 2007 can am renegade 800

Hey guys I was just wondering if anyone knew how to take the speed limiter out of a 2007 can am renegade 800

So the rad fan has worked in the past(I’ve heard it run). I ran the quad all day without a glitch. The winch worked earlier that day also. Late in the day the bike began to overheat(the fan never ran). This happened 3 times on the way back. At the truck, the winch wouldn’t work either. I tested the winch direct to 12V & it works everytime. I’m wondering if there is a common ground wire for both & it’s location?

’09 Gade 800X 4X4

So the rad fan has worked in the past(I’ve heard it run). I ran the quad all day without a glitch. The winch worked earlier that day also. Late in the day the bike began to overheat(the fan never ran). This happened 3 times on the way back. At the truck, the winch wouldn’t work either. I tested the winch direct to 12V & it works everytime. I’m wondering if there is a common ground wire for both & it’s location?

’09 Gade 800X 4X4

Hey guys I was just writing to let everyone know that’s having the charging problems with the 06-09 Rene’s and outy 800s can am has superseded to the new bigger staters automatically, so that means if you go and order a new stator you get the new bigger one that’s suppose to fix the charging issues according to the can am dealer

https://vimeo.com/128369781
76whp
Air box mod, dual dominators, cvtech primary and STM secondary by mr clutch, Bom racing super mags, ported TB, dobeck gen 4 tuner.

Sent from my iPhone using Tapatalk

Hey guys I am wondering what engine oil, rear diff, front diff and gear box oil you need and how much. I want to switch to ams oil. And I have 75w90 gear oil synthetic gl-5 al delco ( like 5 bottles) which I woiuld like to use in the rear diff or gear box.

Thanks for the help again guys

starting to have issues starting my renegade these days.
a while ago, the odd time when pushed the start button nothing would happen.
i would pull in the brake lever or maybe rock it a bit and would fire up.
this is now becoming a issue more often than not.
really have to pull the brake lever in hard, rock it, change gears etc then
it will make the connection and fire right up. thinking it is some type of a
electrical connection issue but have no idea where to even start ??
help please

Who out there makes a good 4" lift for 2012 renegade and up? I’m looking for something that is strong, reliable, and will last.

Sent from my iPhone using Tapatalk

Hey guys. Today I was just riding and my renegade 1000 went into limp home mode I let it sit for a while and it wouldn’t start. Unplugged the ground and it started up. Ran it for a bit coul not mmaintain idle until it was running around for 20 min. So after it was running good I plugged in the controller. Within 10 feet it went back into limp mode. Unplugged it and it ran fine. It would stall with the Controller plugged in at idle. I need some advice Iam tthinking it is thr controller. Get Torqued blink box which I think is dolce controller. Thanks for the advice and help