So I was washing my machine the other day and I came across 3 wires by the right front shock area. Ones black with an eyelet on it most likely a ground the other two are green and blue and both have spade style connectors male and female. I have attached some pictures. What are they for?

Attached Images

	IMG_1913[1].JPG (1.08 MB)
	IMG_1916[1].JPG (1.08 MB)

So I was washing my machine the other day and I came across 3 wires by the right front shock area. Ones black with an eyelet on it most likely a ground the other two are green and blue and both have spade style connectors male and female. I have attached some pictures. What are they for?

Attached Images

	IMG_1913[1].JPG (1.08 MB)
	IMG_1916[1].JPG (1.08 MB)

I have a 08 renegade and was curious as to if the fan is working. Nothing comes on the dash as if it’s overheating but wasn’t sure if something was to come up or not. Any way to check it or I should be good?

So i got my first renegade about 3 months ago and just recently decided to service the belt. I removed the belt noticed the input bearing on the gear box was a little sloppy. So i continued to remove the primary and the secondary clutch. Followed by the entire motor in order to take the gear box out. Problem is in the process of removing the primary clutch the spider became seperated from the rest of the clutch and i never marked its possition. So now what do i do? I understand this is a balanced assembly and i dont want to damage anything by re-assembling in the wrong location. Also a few of the sliders fell off and i noticed the little square on the back was broke off. Is it ok to re-install them or should they be replaced?

Hey guys, so the other day was out on my 07 ren 800 and went to pull a wheelie there was a clunch and she didnt move, pulled the clutch cover to take a look and the secondary helix melted down does anyone have a part # for an aluminum replacment one? thanks

Hey guys, so the other day was out on my 07 ren 800 and went to pull a wheelie there was a clunch and she didnt move, pulled the clutch cover to take a look and the secondary helix melted down does anyone have a part # for an aluminum replacment one? thanks

Hello! Recently on my G1 gade squeaky noise appeared on low spins. I took off plastic and it seems to be secondary clutch.
Here is video:

Is it bearing or something wrong with gear box? How to fix this?