My can-am 650 outlander max, two-up is telling me that it is over heating!! I know it is not actually overheating, because the engine light and the fan will turn on only after like 10 minutes of being out! I put in a new temperature sensor and it didn’t change anything! I didn’t know if it could be a wire scenario or something? It does not have anything to do with radiator because I got all of the air out of it and it worked fine previous to this! Please help me…:th_smiliepissed::th_smiliepullhair:

My can-am 650 outlander max, two-up is telling me that it is over heating!! I know it is not actually overheating, because the engine light and the fan will turn on only after like 10 minutes of being out! I put in a new temperature sensor and it didn’t change anything! I didn’t know if it could be a wire scenario or something? It does not have anything to do with radiator because I got all of the air out of it and it worked fine previous to this! Please help me…:th_smiliepissed::th_smiliepullhair:

Picked up the bike tonight. 2015 outta 1000xt. Gonna have Raceline Mamba wheels 29.5 outlaw2, BRP rad relocate and custom snorkel.

Anyone here fill out a loan app on Shefield Financial’s website, get approved, then go to their dealer and get told that they have to resubmit your credit info?

I was approved Saturday for the price of the bike and called the dealer today to give them the number I was given so the dealer can give the bike info. We’ll I was told that it doesn’t work when they do that. They have to submit it themselves.

Am I getting a line of BS or has anyone else had this told to them.

Which one should I go with? I need to 2" lift kit for my Can Am 2014 Outlander Max XT. I just recently bought 29.5 outlaw tires on my outty and it rubs a bit on bumps. I have already cut what needy to be cut already, but it’s rubs on the inside when I hit on bumps. Will the HL 2 be too much of my axle, members says it does, but on the website it’s says it’s made for stock axle. I don’t abuse my ride as much as most. Will the RBC be enough to lift my bike?

Hey guys so I noticed that my axle popped out of my differential. I jacked it up and noticed that the right side trailing arm or swing arm (not sure what it’s called) had some play in it and the other side did not. Could this of been the cause for this? Does the axle just clipped into the differential? I’m knew to this so would like to see if anyone else may have had this problem. Thanks guys!

I’m looking to install a light bar on the front of my 07 outty max 800. I have done a lot of searching, but cant seem to find the answer I’m looking for…. the average 20" bar is 126W with 42 3w led bulbs, the wiring harness that come with these lights is all pre wires with a 40a relay or an 30a main fuse in wiring harness.

Can somebody tell me what is the most watts and amp draw I can put on the stock system without issues? will I have any probs with this 126w setup… thanks,

I have a outlander 500 and Iam having an issue with it cutting out. It will run perfect then it acts like you shut the key off for a second and turned it right back on. It may do this 3 or 4 times if I ride it all day. I checked the fuel pressure and it was good it had 51 psi I put a new fuel filter on it. But I have noticed it started doing this after the speedometer started acting up. The speedometer will read zero when riding it then all of a sudden it will start going crazy and every time it cuts out the speedometer needle jumps up to like 60 mph. Every time I ride it I know exactly when it’s going to cut out because the speedometer needle will go crazy. The speedometer needle will also go crazy when it’s not moving it will do it when it isn’t moving as well the fourwheeler will just die but it always start right back up. It does it whether the machine is warmed up or it is cold. I don’t want to start throwing parts at it just yet any ideas?

After I went riding in a few mud pits, I noticed that my fan was making a high pitched whine when it came on. I thought something was stuck in there so I reached in and turned it with my hand with no problems. It’s working fine, but it still makes a weird noise. Any suggestions?