took my quad up to maine last week and got a LOT of crawling around rocks, stumps and deep deep mud. figured i would give my opinion on what ive found so far. so here it goes
first off i will say 99% of my riding was in low gear hauling logs and lumber through the woods. i went in bud over my floor boards and i totally forgot to put it in 4 wheel drive!!
when i was in the grass and mud. i punched the throttle once…. thats all it took. and the machine stood straight up in the mud! these things bite hard and pull.
i could not tell any difference in the weight at all. but i did notice when i was around 3800 rpm just riding through the woods i thought my tires would be spinning like mad, but they were just crawling through the mud. lots and lots of traction!!
i only put it in high once when i got onto the fire road and it took a little bit.. again im being very very picky. little bit more throttle to get moving. but once i was doing 10mph i could wack the throttle and the machine would rip!
as far as smoothness goes. does not matter the speed at all. it was not rough at all. no handle bar shaking or anything!
overall 100% happy with these and i cant wait to get more high speed miles on them!!!

Anyone running or have experience with the STI Rocktane XD 8-Ply Radial tires? Looking at them in the 27X11 and 27X9-14s for my 850. Also got my eye on the Sedona Ripsaw R/Ts in 26".
How aboout pricing? Best prices, anyone?

If a single beadlock wheel/tire becomes flat will the tire roll off the rim on the inside? Is it better to have a dual beadlock?

If a single beadlock wheel/tire becomes flat will the tire roll off the rim on the inside? Is it better to have a dual beadlock?

I thought i would get 27x8x12 on the front but i guess they dont make ’em
27x9x12 =yes but understand they will rub the tie rod end.

as for the rear i could get 27x 11×12 or 27x12x12

Anyone have upsize tires that work well on these? Pictures would help also

Does anyone know if the wheels from Honda Rincon, kawasaki brute force, yamaha grizzly will fit on a Polaris?

I found some on Craigslist and the owner does not know if they will fit on a Polaris he says they are a 410 wheel?

Hey guys i just purchased a set of wheels and tires from Discount Tire Direct. Everything is good and came very fast but they sent me 10×1.25 lug nuts and they did not work. Before i call them back to fix this what is the correct size? Should i of gotten 3/8 lug nuts? My quad is a 2013 Polaris Sportsman 500 H.O.

Thanks in advance.

I am looking for new wheels for my Scrambler 850LE , and I have looked at Sector 3 beadlock . Does anyone have experience with this wheel ?
I run mostly standard track most of the time , and a few times a year rally in Poland.
So I ‘m curious if anyone has good or bad experiences with these wheels , so I do not spend so much money on these wheels .

Looking forward to hearing from you, thanks a lot 🙂

Does anyone know anything about these tires? Doing a search doesnt bring anything up. They are very similar to the Executioners. Didn’t know if anyone had a set?…

So I have a set of Polaris 14" wheels that were on my 850 xp when I bought it. I have searched and searched but can’t figure out what they came on originally. I am trying to sell them and am wanting to know to help with fitment issues on rangers/rzrs.