Ok i have a 2012 850xp and my secondary clutch came with four shims and very difficult to shift. I tried removing shims one at a time and the secondary still spins at idle. I even tried adding an extra washer to give it five shims and still the same. I hit the brake and it stops then as soon as i release it the secondary starts spinning again. It spins in neutral and in gear. Do I need to add more than five shims or is there something else wrong. I sure would like to fix this as it is very annoying trying to shift gears. The primary has the red spring in it , dont know if that makes a difference. There is no clutch kit installed.