I have a 2016 Honda Rancher 420, I just ordered ITP SS316 rims (12 inch all the way around). So, my question is what is the maximum size tire I can put on without having to put a lift kit on the bike. I was thinking bear claw HTR 26×9-12 front 26×11-12 rear. Does anyone think this will work or are there any other suggestions? Any help would be appreciated.

I have a 2016, 850 Max XT and if I leave it idling, as soon as the fan starts I can see bubbles coming from the overflow tube attached right under the coolant tank cap.

What could be causing this. A bad coolant tank cap (i.e. it’s too weak to keep the pressure)?

Thank you for any responses!

p.s. Never overheated, no limp mode ever.

I have a 2016, 850 Max XT and if I leave it idling, as soon as the fan starts I can see bubbles coming from the overflow tube attached right under the coolant tank cap.

What could be causing this. A bad coolant tank cap (i.e. it’s too weak to keep the pressure)?

Thank you for any responses!

p.s. Never overheated, no limp mode ever.

I have had my 500 sportsman since new in 2002 and just by luck I found this forum today. I will be searching the site before I start asking questions as they have already been answered I’m sure.
Thanks for having this site and allowing me to join

I have had my 500 sportsman since new in 2002 and just by luck I found this forum today. I will be searching the site before I start asking questions as they have already been answered I’m sure.
Thanks for having this site and allowing me to join

Ok so I have some rims that are older and I’m trying to figure out what brand they are. They are 12" rims. Here’s a picture of the hub cap and the rim style. If anyone knows. Please help me.

Attached Thumbnails

 

Hello All,

I thought I would post a few pics of a recent track adventure!!
We had some deep snow. Powder close to the waist. Long tracks really helped!!

I wasn’t very familiar with the machine, so I wasn’t sure what to expect, but it climbed through without any issues.

No helmet I realize. I got to excited about the challenge to put it back on!!

Hello All,

I thought I would post a few pics of a recent track adventure!!
We had some deep snow. Powder close to the waist. Long tracks really helped!!

I wasn’t very familiar with the machine, so I wasn’t sure what to expect, but it climbed through without any issues.

No helmet I realize. I got to excited about the challenge to put it back on!!

My dad’s grizzly 600 4×4 doesn’t work when on the ground. I can hear the 4×4 motor kick in but the tire just don’t turn when I’m stuck. Just put it on the lift and tested the 4×4 and it works with all wheel off the ground. Anyone have an idea of what I should look for to fix this?

2015 Ren 1000xxc. Hi folks, it’s kinda frustrating when I’m trying to go slow and negotiate a knarly piece of ground, easing on the throttle, and suddenly the clutch grabs and I’m off 😯 Leads to some exciting times and the heart thumps a bit :twitch:
I’ve lubed the throttle cable, no change, so I’m picking it’s clutch related. Will changing something in there cure my problem ?
Any and all comments greatly appreciated :th_smiliethankyou: