I have a 98 recon 250 and was wondering where can I purchase plastics from besides eBay for my yr.. and also from what yr to yr does the 250’s use the same plastic??

I am looking to put 26x9x14 and 26x11x14 on 14×7 Sti HD7 rims. Will this tire and rim combo work on my 2009 xp850? Any issues to be aware of? If any one has these rims or Bearclaw HTR tires wants to offer opinions welcome. Thank You! Steveĥ

I’ve got a 2014 Outlander XT 800R. 1" wheel spacers, 26" Bighorns. Just bought a perfex 2" lift kit. Did the back ok, I little disappointed with instructions and hardware. Especially with the bushings. The inside diameter is way to big and make the bushing very sloppy on the bolt. However, now I’m installing the front, so far I’ve had to cut a couple bushing because of the lenth, that’s not the big deal, the problem is the brackets that bolt to the bike and then the shock bolts to those. One side was ok, the other don’t fit, the bolt that would hold the shock on hits the frame.

Has anyone had any luck with this kit? I can’t even find a website for them to call or email.

Thanks in advance.

I’ve got a 2014 Outlander XT 800R. 1" wheel spacers, 26" Bighorns. Just bought a perfex 2" lift kit. Did the back ok, I little disappointed with instructions and hardware. Especially with the bushings. The inside diameter is way to big and make the bushing very sloppy on the bolt. However, now I’m installing the front, so far I’ve had to cut a couple bushing because of the lenth, that’s not the big deal, the problem is the brackets that bolt to the bike and then the shock bolts to those. One side was ok, the other don’t fit, the bolt that would hold the shock on hits the frame.

Has anyone had any luck with this kit? I can’t even find a website for them to call or email.

Thanks in advance.

This is my first time posting here and I’m a bit of a newbie…any help would be greatly appreciated.
Here’s the problem. It was running fine…I turned it off. Went to start it a couple hours later, turned the key and nothing. The green neutral light and red oil pressure light didn’t even come on. No headlights or anything. Obviously it won’t start. But I can kick start it and it runs fine and the lights come on and the headlights work and everything. Can anyone please tell me what I should look at first and help me troubleshoot this problem?
Thanks

This is my first time posting here and I’m a bit of a newbie…any help would be greatly appreciated.
Here’s the problem. It was running fine…I turned it off. Went to start it a couple hours later, turned the key and nothing. The green neutral light and red oil pressure light didn’t even come on. No headlights or anything. Obviously it won’t start. But I can kick start it and it runs fine and the lights come on and the headlights work and everything. Can anyone please tell me what I should look at first and help me troubleshoot this problem?
Thanks

This is my first time posting here and I’m a bit of a newbie…any help would be greatly appreciated.
Here’s the problem. It was running fine…I turned it off. Went to start it a couple hours later, turned the key and nothing. The green neutral light and red oil pressure light didn’t even come on. No headlights or anything. Obviously it won’t start. But I can kick start it and it runs fine and the lights come on and the headlights work and everything. Can anyone please tell me what I should look at first and help me troubleshoot this problem?
Thanks

15 xmr 800, threads stripped for the front drain plug on diff. thinking of trying a helicoil anybody no what size it would be? or any better ways to fix drill and tap?

15 xmr 800, threads stripped for the front drain plug on diff. thinking of trying a helicoil anybody no what size it would be? or any better ways to fix drill and tap?

Hello all

i have a few questions about my intake valves.

i found out one of mine is bent.

so im going to replace it…

i took it out and used calipers on it.

it is a 37mm valve.

is this a stock valve?

should i replace both of the intake?

should i replace the other ones too..

when i replace the valves do i have to buy new shims to do the valve adjustment?