first question , what is different between the 2017 Ranger 500 and 570 other than the engine ? Looking for add-on parts and not much is listed for 2017 Ranger 500 but some sites are cross referencing to the 570 ? Winch mounting brackets being one.
All posts by dstech
2017 Ranger 500
first question , what is different between the 2017 Ranger 500 and 570 other than the engine ? Looking for add-on parts and not much is listed for 2017 Ranger 500 but some sites are cross referencing to the 570 ? Winch mounting brackets being one.
New guy from Minnesota
Hi, my name is Shaun. From fridley Minnesota. I’m a cnc operator, a few of my hobbies are hunting, fishing, mudding, working on cars. I recently purchased a 2017 outlander xmr 1000r, i added Sebring exhaust and am currently trying to figure out what new clutch kit or clutches i should install. Whatever other power adders you more seasoned guys recommend please let me know. Glad to be part of the can am family finally.
New member
I’ve actually already hi jacked someone’s thread(sorry, it was an accident) and Shadetree pointed me in the right direction:biggrin:
I recently purchased a near mint(in my eyes) 1997 Honda TRX300 2wd and while searching for answers to questions I had on the internet, I happened upon this forum:)
I recently purchased a near mint(in my eyes) 1997 Honda TRX300 2wd and while searching for answers to questions I had on the internet, I happened upon this forum:)
Helmet fit
Never had to buy an ATV helmet before now… The circumference of my head fits a size Large on all helmet fitment charts, my wife a Medium. But when we put on the appropriate sized helmet, and it fits great on top, it crushes our faces. I would say that I have a round face and maybe that’s why, but my wife has a slender face and a medium helmet crushes her cheeks. It’s not "painful" per se, but pretty damn uncomfortable. Is that how helmets are supposed to fit when they are brand new? I went to an ATV store and tried on 3 different brands.. been a size Large my whole life and had to put on XL’s so they weren’t so tight on my cheeks, but then they looked way too big and had a little wiggle room. I’ve read all of the safety suggestions and fitment recommendations, I just want to hear it from a human. Do the cheek pads compress more and fit less snug once broken in? Do I just quit whining and suck it up because thats how they are supposed to be? Thanks.
Paint over decal
Has anyone painted bedliner over plastic with a decal on it ?
I hate removing decals. We removed a stripe on a 21 foot boat, both sides.
I hate removing decals. We removed a stripe on a 21 foot boat, both sides.
KK4
Lots of Toys
Hey everyone i am knew to the thread but have been riding Honda’s for years! Hope to get to know everyone as the years go on! I have owned many Hondas and most of my neighbors own Honda’s! My great uncle bought the very first Honda ATV back in 1985 in the entire neighborhood and i am still riding it today!
Fox Air Shocks on the Limited
Can anyone tell me their experience with the pneumatic air shocks on the rear corners of the Max Limited 1000?
I understand they have been in production for about 4 model years. I think the Outlander is the only ATV that offers them. They require a small onboard compressor to air them up or bleed air off. They raise rear ground clearance and stiffness of the suspension.
Are they effective and are they reliable?
I note the Max XP model uses those fancy Fox adjustable shocks.
David
Outlander dash problem
The dash on my bike been going nuts and I can’t get an accurate reading of the millage. All I can see is how many hrs. Its frustrating because in trying to sell it. What you guys think i should do
92 fourtrax 300 4×4 shifting questions and issues.
Hello everyone.
I just bought another four-wheeler. a 92 300 4×4, it has a 54% gear reduction installed and was told it also had the ecb dirt racer clutches installed. I have yet to open up the case or anything on this bike. My problem is this. When I have the bike in neutral and kick it down into reverse it immediately goes into gear and the lever stays down, I have to manually pull it back to center. When i go to shift up through the gears it immediately goes Into gear when I pull the lever up and I have to push it back down to center to shift again or to down shift. It does this in every gear be it shifting up or down. The bike pulls hard so the clutch isn’t shifting and there is no weird sounds. I have read that there is small fork spring that returns the shifter. I guess that is broken but what about the going into gear as soon as I shift? My red 93 shifts normally and the motor is all stock.
I just bought another four-wheeler. a 92 300 4×4, it has a 54% gear reduction installed and was told it also had the ecb dirt racer clutches installed. I have yet to open up the case or anything on this bike. My problem is this. When I have the bike in neutral and kick it down into reverse it immediately goes into gear and the lever stays down, I have to manually pull it back to center. When i go to shift up through the gears it immediately goes Into gear when I pull the lever up and I have to push it back down to center to shift again or to down shift. It does this in every gear be it shifting up or down. The bike pulls hard so the clutch isn’t shifting and there is no weird sounds. I have read that there is small fork spring that returns the shifter. I guess that is broken but what about the going into gear as soon as I shift? My red 93 shifts normally and the motor is all stock.
Thank you everyone. Sorry if this is a redundant question or something but I don’t know so I’m asking.
Thanks
