All posts by dstech

2012 1000 no start

hey guys my kids outty 1000 wont start and it has THr on the bottom of guage.I have checked fuses,relays,3 big fuses at battery,unplugged the dobeck controller,pulled fuel line off and pumped fuel out,new plugs,took battey cables off and on…bike cranks good but no start…it was running yesturday for him….thxs

Carb gurru needed!

I have recently rebuilt my 2005 Sportsman 700 and redid the carb as well, all stock.
I can get the engine to start and run but need choke and to feather throttle. Runs nice however high rpm when I do this. If I let off the throttle at all it stalls. If while revving push in the choke it backfires very harshly out the exhaust and then stalls. My first thoughts were pilot screw circuit blocked, so apart the carb came and clean again making sure that the idle circuit was spotless. Float height checked. Adjusted pilot screw to 2.5 turns out from lightly seated and in went the carb. Well nothing changed to how it ran. It runs the same with air box on or off. Checked exhaust pipe and had installed new donuts too. Idle screw not turned in very much at all as it appeared not to have any effect right now anyhow.
What am I missing?

1st Riding Trip

Probably going for my first ride of the year tomorrow (that isn’t on my own property). Going to Elkhorn Lake & Campgrounds in Java, VA. They just opened the trails for the season Friday. Tried all morning to get someone to go today but couldn’t find anyone willing. Hopefully I’ll get someone to go tomorrow.

2016 Clutch problem

Today I was riding lightly, with everything working fine. A half hour in I went to blip the throttle while in gear and moving and instead of it shooting forward the grizz stayed put and would only begin to crawl once i got it up to 3/4 throttle. There wasnt any belt smoke either so i think it was something else.
Anyone heard of this problem or had it happen to them? Thanks

Best Deals on a Warn Provantage

Hey all. Looking to get a Provantage Front Mount Plow system for my 2016 Grizzly. I know spring is around the corner and we should be done with snow (unless you live in Denver haha). I figure there should be some good deals out there. Been looking for the kit with a 60" blade. The best deal I have found so far is $464.95 and free shipping. This way I won’t be in a rush to get it assembled before the first snow falls. Anybody know of any better deals out there?

2008? or keep mine….any major difference?

Hello all, Sorry for all the threads but you guys are my go to’s with anything ATV so thank you!

Pretty much i have a 2011 550, i love it, but am left wanting more power. So on my quest for more power i may have found a good deal. and now i need some imput.

A dealership has a 2008 fully serviced Grizzly 700. Its blue like mine, and is gonna need some tires soon, but looks like its in good shape. The quad has 1500 miles on it. He said he’d do an even trade for my wheeler and thought itd be fair to both of us….. What would i lose from my 2011 that the 2008 doesnt have…. any gains other than the power? Would it be worth it?

canongrizzman

Howdy everyone
really glad to be a part of the clan. Wish I would have started this 30 years ago, have missed out on years of fun but i’m here now a lot more ache’s and pains, but ready to go.
Love the high lonesome.

2010 Yamaha Grizzly 550