Wasn’t long ago I got me a 2014 renegade 800r been very impressed on how much power this machine has . Join the site bc any help I needed took me here so hey why not join… Proud can am owner!!!
All posts by dstech
Grizzly 350 engine swap
So I recently aquired a 2008 grizzly 350 2wd and I’m wanting to make a 2wd bike that will hang with the big bore 4wd bikes. Light, easy to throw around, but needs a lot more power to hit the nasty holes. Anyone ever done a swap before on a 350 and can tell me the first place to start?
Sent from my SAMSUNG-SM-G870A using Tapatalk
Grizzly 350 engine swap
So I recently aquired a 2008 grizzly 350 2wd and I’m wanting to make a 2wd bike that will hang with the big bore 4wd bikes. Light, easy to throw around, but needs a lot more power to hit the nasty holes. Anyone ever done a swap before on a 350 and can tell me the first place to start?
Sent from my SAMSUNG-SM-G870A using Tapatalk
Spal fan after market on 14 renegrade!!!
People said they don’t have a Spal fan that will fit a gen 2 renegade well I’m here to tell y’all that not true.. I have a 2014 renegade and my factory fan went out and I went with the Hayden 3680 fan aftermarket bc I did not want to spend 200+ on a new factory fan. Well after every ride the Hayden fan would let me down so I sat down and seen every one talk good about the Spal fan so I did some research and everyone said they don’t make one that will fit.. so I looked into the 11 inch low profile Spal fan.. the fan blade fit but motor didn’t after a few adjustments to motor ( cutting required) I made it fit like a glove … All I wanting on now is some mud and water to see if Spal will hold up!!! O AND the fan only cost $65 alot cheaper and should last like they say… here’s a pic to prove it fits. Any questions just ask…….
BRP rad relocate kit
Anyone install or have one? Seems every friggin’ time I go on a ride with the slightest of mud, it gets coated with mud. Went on the SNIRT run yesterday, didn’t get hot or overheat, but getting tired of it. I hate the looks of the Wild Boar and Gorilla, but with the BRP I think it can be modified and not look so ugly.
Yoshimura Exhaust on XMR
Wondering if anyone knows will a Yoshimura exhaust of a Renegade 1000 would fit on a Renegade 1000 XMR. In the Can-Am parts book it says it wont but i have been looking at both mine ( XMR ) and my buddy’s ( XXC ) and the two stock exhausts look basically identical. I don’t see why it wont fit? any helps appreciated
Thoughts on my 400x purchase?
Hey all found the quad for me. I buying 2013 Honda 400x for 3800. This thing is brand new only has 20 hours on it. Show room condition. So what do you all think? Thanks again you all have been great in helping me out in my quest to buy a quad.
Marine3313—Richard.
Marine3313—Richard.
Thoughts on my 400x purchase?
Hey all found the quad for me. I buying 2013 Honda 400x for 3800. This thing is brand new only has 20 hours on it. Show room condition. So what do you all think? Thanks again you all have been great in helping me out in my quest to buy a quad.
Marine3313—Richard.
Marine3313—Richard.
To much play in the rear end
Thank you for any advise. I have a 2011 sportsman 850 efi touring edition.
Seems like it has way to much play in the rear axle. I was riding the atv when a big clunk happened. I actually though I hit something. but nothing was their to have been hit. I took it to a so called dealer they replaced the rear U joint and said it was al good and normal. However it had not had any play previously and now clunks every time and seems to move a few inches before engaging. Can this be adjusted? or what can I do to fix this problem. The bike only has 437ml on it. Thank you, Don
Seems like it has way to much play in the rear axle. I was riding the atv when a big clunk happened. I actually though I hit something. but nothing was their to have been hit. I took it to a so called dealer they replaced the rear U joint and said it was al good and normal. However it had not had any play previously and now clunks every time and seems to move a few inches before engaging. Can this be adjusted? or what can I do to fix this problem. The bike only has 437ml on it. Thank you, Don
To much play in the rear end
Thank you for any advise. I have a 2011 sportsman 850 efi touring edition.
Seems like it has way to much play in the rear axle. I was riding the atv when a big clunk happened. I actually though I hit something. but nothing was their to have been hit. I took it to a so called dealer they replaced the rear U joint and said it was al good and normal. However it had not had any play previously and now clunks every time and seems to move a few inches before engaging. Can this be adjusted? or what can I do to fix this problem. The bike only has 437ml on it. Thank you, Don
Seems like it has way to much play in the rear axle. I was riding the atv when a big clunk happened. I actually though I hit something. but nothing was their to have been hit. I took it to a so called dealer they replaced the rear U joint and said it was al good and normal. However it had not had any play previously and now clunks every time and seems to move a few inches before engaging. Can this be adjusted? or what can I do to fix this problem. The bike only has 437ml on it. Thank you, Don
