I have a 2014 570 Sportsman EPS with a 3500lb Polaris winch on it. Yesterday I had issues with it only reeling in. My neighbor and I troubleshot it and found the solenoid is bad for the release portion of the winch. Is there an aftermarket solenoid that will work, Polaris wants $100 for it, but I have found some on Amazon for half that. Just not sure if they are one in the same.

I have a 1000 outlander on 29.5 outlaw 2s with exhaust and a programmer. stm 3p and stm secondary. When I received my stuff from stm and installed it my shiftout was 6850. Pulled the arms out of the primary and they had 4 grams on the middle dowel and 10 grams on the top. I removed the 4 grams on the middle and my shiftout is only still about 7000 rpms. Any suggestions….Thanks

How do I perform a test on the fuel cut relay to see If its working? I already tested the plug going to it for power and I tested the fuel pump where it plugs in coming from there.Don’t want to replace it if it’s working. Any help would be greatly appreciated, thank you Pete…

Glad to be apart of this forum and hope it can help me out with the problems I have been having with my bike.
:happy::peace::getrdone::banana:

Needing a little help here finding the VIN. Looked high and low on the front plates and tubes,but it is where I haven’t looked! Looks like they made the 350 in the years 2000 thru 2006, but looking up at the first part I need, there are different ones for different years. I need to know the year. Where else should I look? Thanks

Heading down to Sand lakes for my cousin’s bachelor party the first full weekend of May. Just looking for some basic info on what to expect as this will be the first dunes trip for many of us. So anything you can give me as far as what to expect would be appreciated. we’ll have a mix of UTV’s, Sports Quads, Dirt bikes, and rentals.

i have a 2005 grizzly 660 and my bike just dropped in power. It only goes about 31 mph now and struggles sometimes through mud holes. It’s also barely shifting in and out of gears. One of my freinds said it may be the rear diff? Any ideas????

So finally get her back together after doing front bearings and take her for a ride. Turn left and she quits. Try to start her back up and nothing. The brake light comes on. No clicking. Tow her home and no power to the starter. Found the factory maintenance manual and wiring diagram and started tracing wires. Didn’t find much. Tried jumping the starter from the solenoid and nothing. Any ideas?

Possible opportunity for us at bong state park . they have 2 loops of riding . both around 2 miles long each . 1 dirt , 1 gravel . picnic tables , camping at other end of park , fishing , hiking , mountain biking , ect . they have a office with meeting rooms . they might be open to volunteers to help with trail maintenance as they did before , but the old club disbanded and they have no extra help . this is a huge opportunity to get the "foot in the door " with wi dnr , rangers , state officials , and so forth . possibly make more trails if we can show feasibility and revenue . ive already got a phone call in to the superintendent , but he is on vacation until 28th . it might not hurt to call , tell them your from the stateline atv club , ask about trail maintenance and volunteering . the more interest shown , the better chance we have to get in . buckmaster and I are probably the closest . I can meet with them during the day as I work at night . lmk if your interested . richard bong state park is the place . on the corner of hwy 142 and 75 . entrance is off 142 west of 75 . if you guys do call , PLEASE be polite and curtious . even if you dont like bong , some of us do , and its our chance to get in , and make it better ( more challenge areas , more bumps , bermed corners , more sand , ect .

Hi all! Being I just replaced my battery I figured I do things right and get a proper battery tender/charger. I know most recommend the CTEK US 800. Doing a Google search I learned that it has been discontinued. Thought to find old stock here in Canada but after a few calls they’re sold out.