Sorry if this has already been addressed but I am new to this forum. Anyway I just picked up an 87 Fourtrax with the following problems. First, the start button will not activate the starter. I am thinking a bad nurturant switch, etc. even thought the neutral light is on. Any other ideas on that? Second, when I jump the two posts on the starter solenoid the starter will wind up but no engagement. In addition the kick starter will not engage every time. Is there a gear or clutch in common with both the electric and manual starter causing this? Any help would be most appreciated. Thanks

I’m thinking about swapping the diff from a 2004 Honda foreman rubicon 500 all the time 4wd to a 2006 Honda foreman 500 selectable 4wd. What all do I need to change?

Sent from my iPhone using Tapatalk

Hello, just picked up 2002 500 HO. I like to fix them up which includes performance mods as well.. Looking forward to reading, and getting advice from the forum – hopefully be able to share some tech advice too.
BL

Florence county opens tomorrow the 23rd,Marinette county opens saturday the 30th

Looking at tires just to play in mud holes I’m thinking of 27/9/12 on all four wheels atv is a 2015 outlander I don’t want to do a lift anyone have any input or ideas

I have a 2016 Polaris 450 ho. It is a 567cc and the dealer says the difference between this and a 570 is a tune in the ecu. I bought a 570 ranger ecu and now nobody will program it for me and I am stuck with a ecu I cant use now any suggestions?

I have a 2014 renegade and I just noticed the tail lights where on and the screen was on say communication failure… I crank the bike then killed it and min. Later it did it again now the taillights and screen just flicker on and off?? What should I check??

Hello so I need some help. I have a 2000 scrambler 400. When I bought it, it only had 60 LBS of compression so i replaced the piston and rings. Then the carb was leaking so i rebuilt the carb, and replaced the reed cage and valves. Now it that when i open the throttle up that it is getting stuck. Ill even hit the kill switch and take the key out and the bike will still be running at 3/4 open.
PLEASE HELP!