More mud and rocks from portugal with garmin virb xe.

enjoy.

Hi everyone, I’m looking at a 2014 max for 11k with 130 miles on it. Was wondering what opinions were…I just sold my 06 Raptor 700 and don’t know much about the Can Ams. I road that Raptor for 10 years with no major issues. My sister in law just got a new 570 which I rode and really liked it. Anyway one who could give me an opinion I would appreciate it!

Anyone have a Service manual for a 2016 Outlander max xt?

I removed the air box cover, clutch air outlet duct, gas tank, 3-way valve & then removed the breather cover, 7 bolts all 1” long using 5/16” socket. I left the breather hose attached and moved to the side so I could access the rocker cover. Removed rocker cover bolts using 5/16” socket:
2 on left side are long 4”
2 inside and 2 next to cam shaft end (block plug) on right side are
1-5/8” long
4 on outside flange are 1”
I used Permatex Ultra-Grey RTV Gasket Maker to make gasket on rocker cover. Cleaned both surfaces with brake cleaner, removed old RTV with tweezers, needle nose and fingers. Laid a very thin bead of RTV on cover and mated both parts CAREFULLY then finger tightened all bolts. Let sit for 45 minutes and tightened a little more. Then 15 minutes later torqued to 7-8lbs. I let it set up for 24 hrs as recommended so figured it’s a good time to change park plug, oil filter (Bosch 3323), oil (Mobil 1 full synthetic 0W-40), fuel filter, air filter OEM 4”, all new fuel lines, battery, changed tranny fluid (Amsoil TCC per Amsoil rep.) and noticed 3 way valve was leaking when closed so got an OEM off ebay. Put in fresh gas (no alcohol) with seafoam added.
Fired right up and let sit for about 3 minutes to finish burning the oil off the exhaust, checked my new gasket and so far so good. Hopped on and went for a cruze – AWESOME ! I learned so much ! I didn’t even know where the trany drain plug was when I started. Thanks to old post and new friends on this forum I was able to get all of my questions answered. THANKS !
Here are a few photos of my project just after disassembley. I always label bolts/parts, put in little plastic bags for reuse and make diagrams/notes while removing parts – cuz I’m old !

looking inside bottom of rocker cover

inside top of rocker cover

Valves and cam

Hello,

I just got a new rear brake master cylinder and installed it because I was getting no pressure in the pedal or handle.

All hoses are installed and cylinder has been bolted in with brake fluid in the resevoir. I checked in the manual and it doesn’t give a clear idea on what to do.

Any tips or directions? Thanks!

MB Wheels has created an innovative ATV/UTV wheel that not only looks great but is functional. Introducing the MB Wheels 352 ATV/UTV, a tough looking wheel design that comes with bolt on scratch guards to protect the lip of your wheel.

Click Here For: MB Wheels 352 ATV/UTV Availability and Pricing

-BENEFITS & FEATURES-

• Popular 12-inch, 14-inch and 15-inch sizes
• Black Bolt on nylon scratch guards included
• Zinc plated scratch guard hardware included (grade 8.8)
• One piece bolt-in cap
• Optional red, green, blue and yellow protector rings available
• Protector rings also fit MB Wheels MB11 and Vision 551 Five Five One

-WARRANTIES & RATINGS-

• Lifetime warranty on the structure of the wheel to be free from defects in workmanship and materials.
• 1-year warranty on finish
• Load capacity:
  

  -12×7 1150 lbs
  -14×7 1300 lbs
  -15×7 1300 lbs

-SIZE & FINISH-

• 12×7 4+3 ~12 lbs
• 14×7 4+3 ~15 lbs
• 15×7 4+3 ~17 lbs

MB Wheels has created an innovative ATV/UTV wheel that not only looks great but is functional. Introducing the MB Wheels 352 ATV/UTV, a tough looking wheel design that comes with bolt on scratch guards to protect the lip of your wheel.

Click Here For: MB Wheels 352 ATV/UTV Availability and Pricing

-BENEFITS & FEATURES-

• Popular 12-inch, 14-inch and 15-inch sizes
• Black Bolt on nylon scratch guards included
• Zinc plated scratch guard hardware included (grade 8.8)
• One piece bolt-in cap
• Optional red, green, blue and yellow protector rings available
• Protector rings also fit MB Wheels MB11 and Vision 551 Five Five One

-WARRANTIES & RATINGS-

• Lifetime warranty on the structure of the wheel to be free from defects in workmanship and materials.
• 1-year warranty on finish
• Load capacity:
  

  -12×7 1150 lbs
  -14×7 1300 lbs
  -15×7 1300 lbs

-SIZE & FINISH-

• 12×7 4+3 ~12 lbs
• 14×7 4+3 ~15 lbs
• 15×7 4+3 ~17 lbs

MB Wheels has created an innovative ATV/UTV wheel that not only looks great but is functional. Introducing the MB Wheels 352 ATV/UTV, a tough looking wheel design that comes with bolt on scratch guards to protect the lip of your wheel.

Click Here For: MB Wheels 352 ATV/UTV Availability and Pricing

-BENEFITS & FEATURES-

• Popular 12-inch, 14-inch and 15-inch sizes
• Black Bolt on nylon scratch guards included
• Zinc plated scratch guard hardware included (grade 8.8)
• One piece bolt-in cap
• Optional red, green, blue and yellow protector rings available
• Protector rings also fit MB Wheels MB11 and Vision 551 Five Five One

-WARRANTIES & RATINGS-

• Lifetime warranty on the structure of the wheel to be free from defects in workmanship and materials.
• 1-year warranty on finish
• Load capacity:
  

  -12×7 1150 lbs
  -14×7 1300 lbs
  -15×7 1300 lbs

-SIZE & FINISH-

• 12×7 4+3 ~12 lbs
• 14×7 4+3 ~15 lbs
• 15×7 4+3 ~17 lbs

MB Wheels has created an innovative ATV/UTV wheel that not only looks great but is functional. Introducing the MB Wheels 352 ATV/UTV, a tough looking wheel design that comes with bolt on scratch guards to protect the lip of your wheel.

Click Here For: MB Wheels 352 ATV/UTV Availability and Pricing

-BENEFITS & FEATURES-

• Popular 12-inch, 14-inch and 15-inch sizes
• Black Bolt on nylon scratch guards included
• Zinc plated scratch guard hardware included (grade 8.8)
• One piece bolt-in cap
• Optional red, green, blue and yellow protector rings available
• Protector rings also fit MB Wheels MB11 and Vision 551 Five Five One

-WARRANTIES & RATINGS-

• Lifetime warranty on the structure of the wheel to be free from defects in workmanship and materials.
• 1-year warranty on finish
• Load capacity:
  

  -12×7 1150 lbs
  -14×7 1300 lbs
  -15×7 1300 lbs

-SIZE & FINISH-

• 12×7 4+3 ~12 lbs
• 14×7 4+3 ~15 lbs
• 15×7 4+3 ~17 lbs

Okay, not sure about this so I thought I would ask you food plot guys out there. I have a TRX300FW that I use to hunt, fish, and do everyday things with around the homestead. What I was wondering do you think my 300 could pull an ATV plow to break ground to put in my food plot this coming summer? Anyway, hope you that turkey hunt got your birds, around here, they’ve been pretty muffled once they get on the ground. Thanks for the help – Jack