Today it was the very first ride of the year in the mud and it was very funny!! My friend have a rxr and he broke his front diff and start burning a lot of oil !!! Damn i don’t like polaris !!!

Today it was the very first ride of the year in the mud and it was very funny!! My friend have a rxr and he broke his front diff and start burning a lot of oil !!! Damn i don’t like polaris !!!

Looking for a used fan blade only for my 300 Xpress. It has 5 blades.Thanks

Well it’s been awhile since I’ve posted or been on here period.. So last ride I did the normal overview of my bike to make its good or if anything needs to be replaced. Right rear wheel bearing has some play. Ok I thought, no big deal.. Got a new bearing get everything apart and get to the removal of the spanner nut where the trailing arm bearing is.. Cemented in, yep, I removed the snap ring, yep, I tried heating it up, a lot and yep, I tried every possible air gun, electric impact, pry bar etc.. Even made a new socket for it think it will have more bite. Not a budge.. Wtf do I do now.. I replaced the left side trailing arm bearing before and was able to get it with an impact. This right side is stuck. I even thought it might be reverse thread and still got nothing. I’ve been working at it for a couple weeks now.. I’m out of ideas.

please advice.
for a atv the clutch p/n 1321842 ?

Hello im new to the site . Im hoping for some help here . I have a 2007 grizzly 660 that is turning over hard ,ive put a new battery and solenoid . I have checked all wires and connections and it all looks good . When you hit the starter button it clicks at the solenoid so i pull on the backup pull start until it releases compression and then hit the button and it will roll and start . I would appreciate any ideas on what to try next . Thanks

New to the site, just purchased a 2006 grizzly 660 and I need to replace the front drive axle and couplers. I am about to place an order through part discounter but I am unsure which is the correct rear coupler i need (between front of engine and end of shaft) and also the coupler for the front of the axle shaft ? Any part #’s or even a pic would be a big help. Thanks

Totaled my 2008 650XT 1 week ago.

Today I drove 4 hours one way to pick up my new ride :yahoo:

2014 Outlander 650XT Camo
137 Miles / 20 Hours
Full Can-Am Skids Installed

$7,000 😀

I can’t wait to get out and ride it. Gotta get working on putting all my bells and whistles on it!

Attached Images

	IMG_3084.JPG (3.21 MB)
	IMG_3085.JPG (2.05 MB)
	IMG_3086.JPG (1.17 MB)

Ok so I’m trying to figure out what’s wrong here, I just put a 130 pilot jet in and it has a 40 slow jet all this with a dg exaust and uni air filter. What it’s doing is bogging like crazy. Will start and move but after about 3 mins it bogs terribly and makes 0 power.

Found these 2" LED Reflectors on Ebay for $5 a pair plus free shipping! they come from China and took about 2 weeks but they are nearly perfect to replace the stock reflectors on the rear of the L Model. I had to drill the screw hole just a hair and drill a hole for the wiring behind the reflector and tapped into the brake/parking light. I did file the edge of the reflectors just a little to seat them perfectly in the reflector housings. I went with the green for my Zombie Theme. The brake light function is not much brighter than the running light function, but I still love it for the price! They have blue, red, amber, white and green and I think purple. The reflectors are clear when not in use.
2X Round Reflector Green LED Rear Tail Brake Stop Light Third Toyota Corolla | eBay