I got a set of these Sun F 12 ply runflats, they are nearly 40 pounds EACH! (I weighed them without rim). The size is 26x11x12 (back) and 26x9x12 (front)
Are these ok to run on my Grizzly 450? I need flat proof tires for a specific trip I am doing… What, if any issues could these tires cause? These tires are super tough and will run without any air at all without deforming.
I am only doing 10 miles and hour max on these tires.
Looking at rear boxes. Usually ride solo but usually carry an extra helmet if a friend wants to take the quad out. Would want a box room for ideally 2 helmets.
Looking at:
Plano Rear Mount ATV Box
Around $100, seems to have some quality issues and not sure how I feel about bungees as latches to close it.
Raider ATV-500 Rear ATV Rack Box
Around $100, lots of people complain about the latches and the built in lock.
Any others that I am overlooking? The box does not need to lock, just want it secure and enough room for helmets and some other small things.
have 850 XMR. what is the best oil to use. will 0w40 work. and do I really need the BRP oil.. the mechanic I go to said he puts Mobile 1 Syn 0w40 in it.
is that good oil??
also I heard lifting a bike isn’t good and causes more stress on parts. However, would a 2in lift cause any stress at all or would that be ok.. just to have that little extra clearance.. I have the stock 30in backs.
I’ve had a 08 Suzuki king quad 450 since new. It was time for more power. Now I have almost 100 miles on my less than a month old xmr 650. Loving every bit of it so far. So far a 12" lift bar, 8" towers, full skid plate and a winch I’ve put on. Have a light for reverse waiting to be out on.
Bought a brand new fourtrax 300 centrifugal clutch on ebay and it says its only for the 2×4 models and the seller has another one that looks the same and says its only for 4×4 models.. although I checked bike bandit and all the "part numbers" are the same?? so its fine?? I’m sure some of you know if its compatible with both types of driveshafts.
Hi everyone. Ive noticed lately the suspension on my 400ex isnt as plush as i would like. I brushed it off at first thinking i just wasnt used to quads (its my first quad, rode dirt bikes before)
A friend bought the same quad but ’03 and i noticed the front shocks rebound much faster than mine. Even after attempting to set my rebound i noticed little difference.
Worth noting that my front shocks are not stock. They have preload adjustment and nitrogen cans on them (from a 450r or something) nevertheless, the lack of change in shock performance when i play with the compression and rebound is slightly alarming. Anyone know why this is happening? While i am a technical guy, im not too familiar with suspension stuff. Am i missing something? Do i need to rebuild the shocks? (Sure hope not…)
Thans in advance for any advice.
Hi everyone. Ive noticed lately the suspension on my 400ex isnt as plush as i would like. I brushed it off at first thinking i just wasnt used to quads (its my first quad, rode dirt bikes before)
A friend bought the same quad but ’03 and i noticed the front shocks rebound much faster than mine. Even after attempting to set my rebound i noticed little difference.
Worth noting that my front shocks are not stock. They have preload adjustment and nitrogen cans on them (from a 450r or something) nevertheless, the lack of change in shock performance when i play with the compression and rebound is slightly alarming. Anyone know why this is happening? While i am a technical guy, im not too familiar with suspension stuff. Am i missing something? Do i need to rebuild the shocks? (Sure hope not…)
Thans in advance for any advice.
Relocated
Well the task is finally over. I sold my home in Texas and bought a house here in Pulaski county in Missouri. I am now looking for a place to ride.Simple trail riding as I am not into the mud scene.Any recommendations? Thanks Ken
Please help, I am looking for a part for a 2006 Polaris Hawkeye 4X4. It is the starter drive gear / bendix. I can’t locate it. There are tons of them for good prices but none specifically say for my year/model. I don’t want to pay $200 for a Polaris one, they call it a gearshaft. Can anyone help?
