I deleted the oil injection. Im going to do a 40:1 mix. What size main should i run. Stock is 82.5. Or can i just run the stock main. No power mods at this time.

Hello guys my name is Fernando I am from Miami Fl and just purchased a new to me 2013 renegade 1000 sst g2. First of all the power is insane compared to my old 03 Honda rincon 650. So I bought the bike with a damaged primary cutch and supposedly it had issues with the idle control. A buddy of mine loaned me his primary and a new belt and bike runs great. At first it would idle high after you would rev the engine a little bit in neutral but would idle normal when I first started the engine. after running it for a while it stopped doing it on its own. So… Going to be doing full service this week don’t know where to start aside from the obvious engine oil, diffs and gearcase oil. Saw some grease fittings in the suspension I will grease those also. What do you guys recommend I do and what oils should I use again any input would be greatly appreciate it bike has 42 hours now and about 140 miles.

Wondering what I am doing wrong.

Trying to loosen up the sand on our beach with a pull behind harrow. Nothing to big and my sportsman 500 efi pulls it fine. My problem is it keeps over heating on me.
I originally was pulling in Low around 3500- 4000 RPM and it over heated, I tried in high gear around the same 3500-4500 RPM thinking the speed would but more air across the rad but again it overheated.

Am I just trying to go too fast?

Hey I went from the stock tire of 25x8x12 (F) and 25x10x12 (R) to 26x9x12 (F) and 26x11x12 (R) do I need spacers?

Let the voting begin for the May 2016 Polaris ATV of the Month! We will leave the poll open until the end of the month and then announce the winner. We got some really good pics this month, thanks to everyone that participated and GOOD LUCK!!

xdriver

2011 Polaris Sportsman 850 XP Touring.
STI HD6 / 29.5 OL2 S/W.
Wild Boar Rad Kit w/ (red) Led.
QSC Clutch Kit.
Warn Pro Vantage plow System.
Venom 5000 lb Winch.
Guru Front Bumper w/ Anzo 10" led Light Bar.
Polaris Lock-n-Ride Trunk.

J Eekhoff

bmerwin

1000 Sportsman Highlifter

the transporter

570
Polaris front brushguard
Polaris handguards
Cabelas Rear bag

gibbons025

2015 Sportsman 850 SP

Orange16570

2016 sportsman 570
Kfi stealth 3500 pound winch synthetic rope
Powermadd handgaurds

ThorsHammer

2007 Hawkeye 300

miclashley

2016 General

Gonzalez 13

2016 polaris sportsman 450 H.O

850sp2015

2015 Polaris sportsman 850 sp
3500 lbs Polaris winch with synthetic rope
Rdc rad relocation kit
Rvs diff fix
28" ITP mega mayhems
14×7 STI HD6 radiant orange
Big gun Eco slip on exhuast

Lollygagger77

2012 Polaris 850 XP HO w/EPS
Magnetic Metallic
27" Mudlite ITP XTR’s
QSC Clutch kit
3500# Polaris winch with Synthetic Rope
Polaris Front Brush Guard
Polaris Lock n Ride front and rear storage
Polaris Mid Lock n Ride Windshield (smoke)
60" Warn ProVantage Plow
Symtec Hand Warmers
Quadrax Rear seat w/foot rest kit from ATVSUPERSTORE – Square Tube

llewokj

BigMo

2015 Sportsman 570 efi/EPS
Big bore rad kit
3000lb warn winch
Bison brush gaurd
Quad boss seat/storage
HD alloy rims
Gbc Grim reaper tires

K.B.Little570

Polaris 570

as the title says I just picked it up. Comes pretty loaded but I added a couple things like the complete audio system led bar full front brush guard ram mount dash net interior light. I have a Polaris ranger 900 camo full cab so I’m excited to compare the two. Will keep everyone posted as I know there isn’t much information out there on these machines.

I’m 6’7" so I also did a seat mod to get some additional leg room.

as the title says I just picked it up. Comes pretty loaded but I added a couple things like the complete audio system led bar full front brush guard ram mount dash net interior light. I have a Polaris ranger 900 camo full cab so I’m excited to compare the two. Will keep everyone posted as I know there isn’t much information out there on these machines.

I’m 6’7" so I also did a seat mod to get some additional leg room.

On my 1996 350 4×4 the rear main seal is leaking. I read that may just be the rear yoke bolt being loose. Hopefully that is it. I am wondering though does the oil from the seal area come from the engine oil or is there a separate oil supply for the transfer case? As I look at it it appears it would be the engine oil so I better take care of this soon so the engine oil doesn’t get low enough to seize.

I just got a 96 Big Bear 350 4×4. I’ve had a Honda Fourtrax 300 4×4 for 5 years. The big bear seems pretty similar in function but a little different in component layout. I’ve also have a Yamaha XT225 dirt bike so I’m somewhat familiar with the 350s engine design.

The ATV start easily and doesn’t smoke. It rides well. The only issue it has is the rear main seal is leaking. I read that may just be the rear yoke bolt being loose. Hopefully that is it. I am wondering though does the oil from the seal area come from the engine oil or is there a separate oil supply for the transfer case? As I look at it it appears it would be the engine oil so I better take care of this soon so the engine oil doesn’t get low enough to seize.

Looking to touch up my rear bumper on my Outlander Max. It is the octane blue color. I rubbed off quite a bit of paint, a spray can would probably be best. Anybody know the paint code or where a list could be found? Thanks.