Ok, so I’m new to forums all together so with that being said please bare with me.
I’ve recently traded for an 07 outlaw 525 irs. The owner before the guy i got it from had removed the motor and its been missing ever since. ive searched all over with no luck finding any solid engine / transmission assembly for it. hoping someone on here can point me in the right direction. its also missing the carb, starter, chain, and likely a few other parts.
Hello everyone, I am from the big town, I mean map dot of singer la. I have had a few older Hondas, my little boy is starting to get interested in riding. We usually ride a little recon but I have a 86 350d that I need to get going and I like reading about four wheelers and looking at pictures.
Had my bike out over the weekend was working great , went through a water hole and still worked fine shut it off and then started it again ten minutes later for a short run . Went to start it after that no spark . Got it home and found the fuse box was a little damp so cleaned it up and F1 ignition fuse was blown , replaced it and the bike started for a minute then quit , it had blown the same fuse , replaced it again and hasn’t blown it but no spark . Have all power on the speedo and fuel pump is working . Any help appreciated
Anyone have a set of these in 14". How close to 28" are they? Some say they run short. I just ordered Hd6 wheels and decided I’m going with the executioners,I know their heavy but I think the XP 1000 can turn them.
recently I purchased a 96 scrambler that was in decent shape. In going through it, I noticed the front right shaft boot was badly torn. I decided to replace the entire shaft so i purchased one from ebay after matching part numbers ect.
I get the shaft today, get the old one out and then,…..noticed that the shaft that came out of the wheeler has a long key way that holds the clutch assembly not the multi spline that I purchased. I also noticed that the bearings seem to be a few thousandths too small to fit on the shaft. Im fairly sure i got the right shaft in the mail so my question is what year and or model took a single spline/key way drive for the hub. Im guessing it took a doner from some other machine?
I plan to change the fluids in my front and rear diff pretty soon, and I was planning on using Valvoline or Mobil 1 75w-90 for the front and Valvoline or Mobil 1 75w-140 in the rear. It’s a 2011 Outlander 500.
The Mobil 1 75w-90 is $12.99 and the Valvoline is $11.49.
The Valvoline 75w-140 is $13.99 and Mobil 1 is $19.99.
My other question is there’s a Lucas Oil 75w-90 Marine Gear Oil for $14.99. Is that worth getting for the "marine" properties or is it just marketing…or not compatible altogether?
Just curious if anyone knows a good location to find oem plastics or aftermarket plastics for 86 fourtrax 350, I am new to this forum. I tried to search for this topic but could not get search to work. Thanks guys
I stopped at Advanced Auto this afternoon to get a replacement spark plug for my Sportsman ETX. The manual says it’s a Champion RG6YC. One of the plugs they told me was a cross reference was an NGK TR5. But I’m really confused. Trying to compare specs, the NGK says the thread body is 14mm. Another site says the Champion is also 14mm. But something else I found says the Champion thread body is 10mm. And nowhere that I found online shows the TR5 as a cross reference to the RG6YC. Any one with any thoughts?
