I really wanted the Warn (owned 3 in the past and never let me down), but the price was right on the Superwinch LT3000 and I went with it. I have heard that Superwinch has a pretty good track record too. I paid $170 for the unit and it was really the best name and spec for the money.
I am certainly going to strip off the wire rope and replace it with a synthetic rope from Custom Splice (link below). Custom Splice is a great source for synthetic winch rope. I bought CS ropes for two of my previous Warns and they were great.
2016 Sportsman 850 is getting real hot exhaust glowing red/orange. Seen a post saying to pull the spark plug and see what color it is to see if it’s running rich/lean/normal. Did that and spark plug looks fine. So could anyone tell me what else I could check/do to solve this issue? Polaris customer service is useless. Thanks.
Speedo kit install going better than I expected. mounted the display but cut away more of the dash than needed–no biggie. Mounted the sensor and bracket to the frame just to the inside of the rear brake pedal–there’s a threaded post for this bracket mount. Pulled the oil cooler hose so I could remove the counter shaft cover–now to look at why I have to remove the speedo drive plug that’s already in there with one from the kit. They both look the same
Speedo kit install going better than I expected. mounted the display but cut away more of the dash than needed–no biggie. Mounted the sensor and bracket to the frame just to the inside of the rear brake pedal–there’s a threaded post for this bracket mount. Pulled the oil cooler hose so I could remove the counter shaft cover–now to look at why I have to remove the speedo drive plug that’s already in there with one from the kit. They both look the same
Anyone know of a source for a replacement fox shock? I think mine is too far gone for a rebuild. Not wanting to spend 800 on a Leka either. Have been looking at ebay but 150 is steep!
Anyone know of a source for a replacement fox shock? I think mine is too far gone for a rebuild. Not wanting to spend 800 on a Leka either. Have been looking at ebay but 150 is steep!
Had anyone installed the Polaris HD springs? My question is does the black bumper inside the spring do you push it till it goes half way thru till the top of the spring sits in the cut out indintion on the bumper?
Had anyone installed the Polaris HD springs? My question is does the black bumper inside the spring do you push it till it goes half way thru till the top of the spring sits in the cut out indintion on the bumper?
