Was wondering if anybody knows about the quality of these trailers, found a 14′ by 80"aluminum, was wondering if these are good quality trailers? made in MN.

before i go taking my mud zillas of my rims i want to make sure my other tires will fit. I believe the front wheels are 12×6 and the rear is 12×7.5 the front tires will be no problem but will they fit on the rear wheels?

Hi all,

Should have posted here first I guess..

Only just become a member but I’ve had lots of useful information from here in the past months, thanks 😁

I am working on a John Deere Buck and I am having a hard time finding any useful info on setting the valve timing. As near as I can tell the engine is the same as the Quest. I have a manual but it does not indicate how to set the valve timing correctly it only says to put the cam at TDC. The timing gear has several sets of marks so I am not sure which to use. Any help would be greatly appreciated!

I am working on a John Deere Buck and I am having a hard time finding any useful info on setting the valve timing. As near as I can tell the engine is the same as the Quest. I have a manual but it does not indicate how to set the valve timing correctly it only says to put the cam at TDC. The timing gear has several sets of marks so I am not sure which to use. Any help would be greatly appreciated!

I have been thinking of a little lift and mud tires for my new 2016 sportsman 570 eps. Has anyone used these lift spacers? Opinions? Also what do you recommend for a tire and rims for playing in the mud ? How big and what type of tires? That’s for the help

Attached Thumbnails

 

 

I have been thinking of a little lift and mud tires for my new 2016 sportsman 570 eps. Has anyone used these lift spacers? Opinions? Also what do you recommend for a tire and rims for playing in the mud ? How big and what type of tires? That’s for the help

Attached Thumbnails

 

 

I’m new to this site guys so don’t shoot me! 😁

Is there a thread on here about fitting the 250TRX gear internals into the 300TRX to reduce the gearing?
This is something I want to do but I need more ‘how to’ knowledge.

Cheers.

Moving from Texas to Oklahoma and really don’t know anyone in the state so figured I’d post up on some forms and see if I could make a few friends.
I’ve got a 2014 Renegade 1000xxc with cam and bolt ons making about 78 whp looking forward to hitting Little Sahara and the Canadian River in Amarillo

Sent from my iPhone using Tapatalk

Hi all,

As per the title really… Is it possible to fit a 300 trx engine into an 85 250 trx?

The fabrication isn’t an issue to me as such, just wondered if it’s actually possible. Is there enough room, are shafts the same spline and length etc etc.