OK, so here it goes, i have a 2001 grizz 600 that won’t start!
Here’s what’s been done so far – the carb has been cleaned out very thoroughly, there is good spark and my fuel is brand new.
I started the set screw at 2 1/2 turns out and have also tried it at various intervals up to about 3 1/2 turns out and still it own’t start.
Here’s what’s been done so far – the carb has been cleaned out very thoroughly, there is good spark and my fuel is brand new.
I started the set screw at 2 1/2 turns out and have also tried it at various intervals up to about 3 1/2 turns out and still it own’t start.
I have taken the breather box off and have not put it back on because i was taking the carb off a few times, so didn’t see the need in putting it back on until it ran…not sure if this is a good idea or not.
While trying to start it i actually have a spray bottle and i give it a few shots of gas, when i do this i can get the bike to sort of run but for like 2 seconds.
So something leads me to believe that i am not getting gas, but when i cleaned out the carb there was gas in the float bowl area.
This has been an ongoing issue for quite some time now and i would love to get this quad up and running.
Do i need a new carb possibly???
Any help would be AWESOME!!!!!!