Hello everyone. Last night I decided to add a second smaller radiator on my front rack, much like a rad relocate kit. I had a heater kit lying around from a sxs, and a small electric motorcycle. I had to mod the heater kit a bit(pretty much cut it for better air flow and for the new fan). With suprise the stock brackets would allow me to bolt it to the 2 most forward 8mm bolt on the front rack(a little trimming of the brackets were nessesary). I did use spacers and longer bolts to mount it. For plumbing I ran the original top rad hose up to the top of the upper rad, then out of the bottom of the upper rad back to the upper of the lower factory rad. Because of the small size of the new fan I just tapped the power off the original fan and tested it before I soldered everything. I do plan on cleaning the mount up and adding a metal screen when I make a snorkel kit up for the kodiak in the next month or so. I heat cycled it a few times last night and I noticed a much shorter fan cycle time, which is a good sign. The second rad is approx half the size of the stock rad, but its twice as thick of the stock rad. Ive always wondered if this idea would work, so I gave it a try. Not to mention here in Canada a rad relocation kits is almost $300, and my idea was free lol. We are doing some good riding this weekend so ill keep you posted!