ACS Module bypass

Well, I have the dreaded air fault / engine light, and with extensive testing I have determined that it is the PCM (calibrated module) causing all my problems.
I have decided to bypass the module, and just use some switches and a dual needle pressure gauge. I have ordered all the parts off of EBAY for $105.00 USD shipped.
The parts list is:
– 2 momentary push button switches – Waterproof Start Horn Momentary Blue LED Light Push Button Switch Boat Car | eBay
– 3 locking push button switches – Blue LED Metal Switch Self Latching Locking Push Button 16mm Waterproof | eBay
– 1 52MM dual needle air gauge – Viair 2" 160 PSI White Dual Needle Gauge Air Ride Bags | eBay
– 1 10′ 1/4" OD air line – 1 4 Tubing for Push to Connect Fittings Black 10 ft Cut PE0417K | eBay
– 3 1/4" OD PTC Y fittings – One Touch Push in Fitting Y 1 4" OD Tubing Pneumatic Air Push to Connect Fitting | eBay
– 2 1/4" OD PTC plug caps – Push in to Connect Tubing Quick Cap Plug Fitting 1 4" OD Mettleair | eBay
– 2 1/4" OD PTC 1/8" NTC female – One Push Touch in Straight Female Fitting 1 4ODX 1 8NPT | eBay
I plan on installing the gauge and switches on the multifunction gauge cover, the gauge on the right side and the switches on the left side. I have attached my schematic so you can get an idea of my plan.
http://www.can-amforum.com/forums/at…1&d=1460866637
I will update this post once I get the parts in and build the system.

Attached Images
File Type: png PCM Bypass no diodes.png (350.5 KB)