Im working on 2 300 fourtraxs. 96 is running, 93 has no spark. I’ve really been studying up on this. I’ve went through all the service manual checks. Put a new ricks cdi and still no spark. With old cdi I’m getting voltage to ignition coil. With new cdi I get nothing. So I’ve been able to check n replace few parts to verify working properly with running bike. My rectifier & coil are good on both. I got ac voltage coming form Altenator & pulse generator. Ignition switches are good. Service manual says these two should be wired the same but the 2 pin connector for cdi are different. 93 has black/white & grey, 96 has black/white & light green. This different wire is on that goes to reverse switch and diode. Diodes both check good too. Anyone got any ideas? Thanks ahead…