Hey guys. Recently got a 92 polaris 350 4×4. Idk what the difference is between the 350l and the 350 or if it will matter when it comes to ordering parts. Secondly the wheeler only has 765 miles on it and has been in our family since new. The motor is sound and the wheeler runs great so no issues there. Hadnt been started in 3 years and started on 2nd pull (battery is dead and need a new one for electric start) thats the good.
The bad: when I rode it a lil while today it seemed like there was a bind in the rear wheel and front wheel. Had smoke pouring out from below the machine and noticed where the rear brake is that it alnost looked like it was grinding. The front brakes have to be pumped many times before there is any pressure to them and the rear brake is almost non existent. I have been looking for the rear rotor and haven’t had any success and would like suggestions on what else I should be checking as far as the binding up goes. Also if anyone has a suggestion on a seat with the brackets that attch to it that would be helpful as well. Thank you in advance