I just recently acquired a 650 outlander max. I parked it after riding a few weeks ago and got back on it after a week, went to start it and it barely turned over, and would not start. I was able to connect a jumper to the or/br wire post and connect it to the neg post on the battery and get it to start. I have checked continuity from ECM to start button, continuity from or/brn wire to switch connector, checked continuity in start button. over 12V in or/grn wire.
replaced battery.
Checked D2 diode, seems to be OK. Replaced the starter selenoid. Stumped.
Checked codes. Scrolled "speed", then end. The display is stuck on "end". Can’t get the mode button to scroll through functions now as seems to be stuck.
Anyone have a similar problem, and what was the fix?