Hi my names mike I just picked up a 02 trx300ex guy said it seemed to be stuck between gears. Anyways he has the right cover off and clutch all disassembled. I did some reading on here and found thst with the quad off and clutch not pulled you should be able to shift thru all the gears with possibly having to rock the quad back and forth. Now my confusion here is this….It will sometimes go thru all the gears sometimes only through two gears but if I reach over and turn the main shaft in any direction just a little bit(because the guy had it all torn down already) it will go through all of the gears no problem. So my question is does the procedure of seeing if it goes thru all the gears when it’s not running still work with the clutch and cover all disassembled cuz like I stated I can spin the shaft and it will shift thru every gear perfly or am I just an idiot because that shaft should not spin while it’s in gear and showing me I have a shaft stripped or something.