so I ordered my 3" proarmor 4 pt harnesses. I didnt want to mess up my orange powder coating on my roll bar to attach the harness and wanted to attach to the brackets pre welded on the roll bar. Well wouldnt you know it, pro armor was so cheap in production, they crammed the 3 in straps into the 2 in harness bracket. I emailed them to see if they had a 3" bracket,which tbey didnt. I found. 3 in dragonfly harness braket at Tremucula.com. Proarmor suggested that the bracket was attached flat for the harness strap had a straight shot. Problem was the bracket on the highlifter was verticle. Some how had to fab a right angle so the belt was pullin at a flat angle.
So, I took the 2" braket and inserted the 3" bracket to make a right angle. Mig welded the 2 together, ground off the hole from the backside of the 3" bracket.
Guess I could have used a piece of angle iron but didnt want to waste the 2" bracket from pro armor. I guess im not too impressed with pro armors cheapness in not making the correct width of bracket. Im wondering if the dragon fly 3" harnesses come with the proper brackets. Here are some pics of mr Mc guyvered brackets.
So, I took the 2" braket and inserted the 3" bracket to make a right angle. Mig welded the 2 together, ground off the hole from the backside of the 3" bracket.
Guess I could have used a piece of angle iron but didnt want to waste the 2" bracket from pro armor. I guess im not too impressed with pro armors cheapness in not making the correct width of bracket. Im wondering if the dragon fly 3" harnesses come with the proper brackets. Here are some pics of mr Mc guyvered brackets.
