I cannot get my 01 250ex to push button start. I took the starter relay switch from my 07 400ex and put it on the 250ex.
Where are the closest wires for me to connect the following wires from my starter relay switch in order to push button start?
Red female tip wire, from the 15a fuse
Yellow/red stripe male tip wire
Yellow/green stripe female tip wire
Where are the closest wires for me to connect the following wires from my starter relay switch in order to push button start?
Red female tip wire, from the 15a fuse
Yellow/red stripe male tip wire
Yellow/green stripe female tip wire
Again, the relay switch I’m using is from my 400ex. The 250ex doesn’t have a yellow/green stripe wire from the relay switch, rather it has Light green.
I’ve already burnt 3 fuses fiddling around, and I only have two left, so I thought I’d ask the professionals.
Could I just run wires from the relay switch straight to the matching ones of the rectifier, or ignition control module ICM, or something?
Thanks in advance!