Hello everyone, a couple of nights ago i was riding my Polaris at night and the front lights and tail lights went out at the same time and the brake light quit working (but the machine stayed running) so i parked it for the night. I got on it yesterday and it would not start. When you turn the key with the brake on it makes the noises, the digital display comes on, the winch works, the battery is fully charged but when you turn the key all the way to start there is nothing. No clicking of the solenoid or anything. The handlebar lever is on the run position so i ruled that out. There are no codes coming up either. I took the hose and cleaned off all break lines and components to make sure a sensor wasn’t full of mud, i checked all the wiring to make sure it was intact and cannot find anything. Of course the warranty ran out a couple months ago so i would like to figure this out instead of bringing it back to the shop. Any advice on what to check next would be greatly appreciated!