So I just did the second oil change in my rancher (first I have done since I got the wheeler) I added the 2.9 qts and replaced the filter with an OEM Honda. once complete I started the wheeler let run for a few minutes shut it down and let it sit for about 2 minutes, checked the oil no oil on the dip stick at all no leaks at all. so I figured I installed the filter wrong, I had to go to work so the bike sat for a couple days, pulled the bike back out checked the dip stick and it was reading Full. Started the wheeler repeated the prior steps. no oil on the dip stick, drained oil removed filter reinstalled, same as prior results this morning dip stick reading full. start it take out trash no oil on dip stick after motor is shut off. is this normal that the oil will not be present on the dip stick for a long period of time after wheeler is running, if you look in the fill cap you can see all the oil in the top of the motor.