Ok I’m having problems with everything on this bike. It’s a 2013 Grizzly 700 4×4. The guy I got it from cut the wires for the fuel pump relays and wired them together, but the bike ran fine til now. I rode it for about 15 minutes and timing chain broke, oil pump chain stretched, and intake valve bent. I replaced all that and put it back together. It cranked up and started to idle up really high so I killed it. Now it won’t do anything at all. When I turn the key on and push the button it clicks. I can hear the fuel pump running and all fuses are good. The solenoid is also new. Everything seems to be getting power, but it just clicks. Can I reset the computer and if so how?