Have a 2011 850 xp with eps with 6600 miles on it. Unit has performed flawlessly from day 1 beside the regular ball joints etc. Past weekend, which was very cold, it stumbled a couple of times. Started fine, but would only let me go about 11-12 mph for about a minute and then all was fine, no error codes. Never had an issue with it so not sure if that is what they call the "limp mode" or what happened. Not sure if it is related but probably is, but the weekend prior, had a code of 520194 2. Shut machine down and good to go. Have been reading alot about the tps errors and nightmares of them, but my first issue of the stumbling (loss of power) for a bit without a code, related? Will check the throttle cable and etc switch adjustment and possibly do the zip tie on the etc switch but just wondering if anyone has had the loss of power with no codes. Any help would be appreciated.

Have a 2011 850 xp with eps with 6600 miles on it. Unit has performed flawlessly from day 1 beside the regular ball joints etc. Past weekend, which was very cold, it stumbled a couple of times. Started fine, but would only let me go about 11-12 mph for about a minute and then all was fine, no error codes. Never had an issue with it so not sure if that is what they call the "limp mode" or what happened. Not sure if it is related but probably is, but the weekend prior, had a code of 520194 2. Shut machine down and good to go. Have been reading alot about the tps errors and nightmares of them, but my first issue of the stumbling (loss of power) for a bit without a code, related? Will check the throttle cable and etc switch adjustment and possibly do the zip tie on the etc switch but just wondering if anyone has had the loss of power with no codes. Any help would be appreciated.