Hey guys I need some help. I have a 2007 680 rincon. I ran it out of gas(oops). When I put fuel in it it would not start. I thought I may have clogged the fuel filter, so I put a new one on, and made sure I was getting fuel to the injector. Now all of the sudden it is not getting fuel, and the spark plug is not firing.
Things I’ve done: new spark plug, new coil, new plug wire. New stator/ckp sensor, checked all the fuses, checked voltage at the 33p connection on the ecm. Cussed a lot , thrown things. I have voltage at the end connection when cranking the motor from the stator, I also have the same voltage at the stator plug. One thing I did think was funny is that I’m reading voltage on both prongs on the weak side of the coil with the key on and not cranking. I ordered a 1/4 stick of dynamite from Mexico just in cas but would prefer to use it on the 4th of July. Please help, any ideas are welcome!!!!