I know this has been done to death but I need help and can’t find what I’m after so this bike would go into reverse then sometimes let me go up the gears 9 times out 10 it wouldn’t it was moving the part that u put the manual shifter on but it wasn’t going into gear reverse no problem so…… I stripped and cleaned the shifter motor removed brushes etc then I replaced the angle sensor and it still did this then……I then adjusted the clutch it then wouldn’t come out of 1st gear stuck it took a bit of playing about with the manual lever to get it into neutral i then did clutch adjustment again and bit did about 5 km then I reversed and went to go forward and it started flashing the "n"3 times I then readjusted the clutch see if that would help still blinking 3 times constant …. So I have disconnected battery and ecu for couple hours then I will connect them again and I will press both up down buttons for 30 seconds to clear the error but I’ve a feeling it’s still gonna be the Same problem anyone any idea what’s wrong with this bike?????
Ohh and it shifts up down gears with manual shifter no problem