2006 650 outlander electrical gremlin

I have gremlin in my electrical system somewhere and am searching for solutions.

I put the key in and nothing, no power to anything.

I replaced the relays in the fuse box with new ones, checked all fuses,including the two at the rear of the bike and every one is good. Battery is fully charged and connections tight. Checked the underside of the fuse box and wires look good.

The weird part is, if I pull the main relay and do a bypass (put a jumper from the lower right pin to the upper left pin), I get power to the instrument panel, lights, fan and I think, the fuel pump as well. Push the starter button and nothing. The relay shouldn’t be bad, as I tried using 2 brand new relays just to make sure.

Any ideas?